(a) Short title.—This Act may be cited as the “Clean Economy Jobs and Innovation Act”.

(b) Table of contents.—The table of contents for this Act is as follows:

Sec. 1. Short title.

(a) Definitions.—Section 303 of the Energy Conservation and Production Act (42 U.S.C. 6832) is amended—

(1) by striking paragraph (14) and inserting the following:

“(14) MODEL BUILDING ENERGY CODE.—The term ‘model building energy code’ means a voluntary building energy code or standard developed and updated by interested persons, such as the code or standard developed by—

“(A) the Council of American Building Officials, or its legal successor, International Code Council, Inc.;

“(B) the American Society of Heating, Refrigerating, and Air-Conditioning Engineers; or

“(C) other appropriate organizations.”; and

(2) by adding at the end the following:

“(17) IECC.—The term ‘IECC’ means the International Energy Conservation Code.

“(18) INDIAN TRIBE.—The term ‘Indian tribe’ has the meaning given the term in section 4 of the Native American Housing Assistance and Self-Determination Act of 1996 (25 U.S.C. 4103).”.

(b) State building energy efficiency codes.—Section 304 of the Energy Conservation and Production Act (42 U.S.C. 6833) is amended to read as follows:

(c) Federal building energy efficiency standards.—Section 305 of the Energy Conservation and Production Act (42 U.S.C. 6834) is amended by striking “voluntary building energy code” each place it appears in subsections (a)(2)(B) and (b) and inserting “model building energy code”.

(d) Model building energy codes.—

(1) IN GENERAL.—Section 307 of the Energy Conservation and Production Act (42 U.S.C. 6836) is amended to read as follows:

(2) CONFORMING AMENDMENT.—The table of contents for the Energy Conservation and Production Act is amended by amending the item relating to section 307 to read as follows:

“Sec. 307. Support for model building energy codes.”.

(a) In general.—Title III of the Energy Conservation and Production Act (42 U.S.C. 6831 et seq.) is amended by adding at the end the following:

(b) Conforming amendments.—

(1) TABLE OF CONTENTS.—The table of contents for the Energy Conservation and Production Act is amended by inserting after the item relating to section 308 the following:

“Sec. 309. Cost-effective codes implementation for efficiency and resilience.”.

(2) DEFINITIONS.—Section 303 of the Energy Conservation and Production Act (42 U.S.C. 6832) is amended, in the matter preceding paragraph (1), by striking “As used in” and inserting “Except as otherwise provided, in”.

(a) In general.—Not later than 120 days after the date of enactment of this Act, the Administrator of the Energy Information Administration (referred to in this section as the “Administrator”) and the Administrator of the Environmental Protection Agency shall sign, and submit to Congress, an information sharing agreement (referred to in this section as the “agreement”) relating to commercial building energy consumption data.

(b) Content of agreement.—The agreement shall—

(1) provide that the Administrator shall have access to building-specific data in the Portfolio Manager database of the Environmental Protection Agency;

(2) describe the manner in which the Administrator shall incorporate appropriate data (including the data described in subsection (c)) into any Commercial Buildings Energy Consumption Survey (referred to in this section as “CBECS”) published after the date of enactment of this Act for the purpose of analyzing and estimating building population, size, location, activity, energy usage, and any other relevant building characteristic; and

(3) describe and compare—

(A) the methodologies that the Energy Information Administration, the Environmental Protection Agency, and State and local government managers use to maximize the quality, reliability, and integrity of data collected through CBECS, the Portfolio Manager database of the Environmental Protection Agency, and State and local building energy disclosure laws (including regulations), respectively, and the manner in which those methodologies can be improved; and

(B) consistencies and variations in data for buildings that were captured in the 2012 CBECS cycle and in the Portfolio Manager database of the Environmental Protection Agency.

(c) Data.—The data referred in subsection (b)(2) includes data that—

(1) is collected through the Portfolio Manager database of the Environmental Protection Agency;

(2) is required to be publicly available on the internet under State and local government building energy disclosure laws (including regulations); and

(3) includes information on private sector buildings that are not less than 250,000 square feet.

(d) Protection of information.—In carrying out the agreement, the Administrator and the Administrator of the Environmental Protection Agency shall protect information in accordance with—

(1) section 552(b)(4) of title 5, United States Code (commonly known as the ‘Freedom of Information Act’);

(2) subchapter III of chapter 35 of title 44, United States Code; and

(3) any other applicable law (including regulations).

(a) In general.—The Secretary of Energy shall provide grants to institutions of higher education (as defined in section 101 of the Higher Education Act of 1965 (20 U.S.C. 1001)) and Tribal Colleges or Universities (as defined in section 316(b) of that Act (20 U.S.C. 1059c(b))) to establish building training and assessment centers—

(1) to identify opportunities for optimizing energy efficiency and environmental performance in buildings;

(2) to promote the application of emerging concepts and technologies in commercial and institutional buildings;

(3) to train engineers, architects, building scientists, building energy permitting and enforcement officials, and building technicians in energy-efficient design and operation;

(4) to assist institutions of higher education and Tribal Colleges or Universities in training building technicians;

(5) to promote research and development for the use of alternative energy sources and distributed generation to supply heat and power for buildings, particularly energy-intensive buildings;

(6) to coordinate with and assist State-accredited technical training centers, community colleges, and Tribal Colleges or Universities and ensure appropriate services are provided under this section to each region of the United States; and

(7) to identify diverse candidates and firms when procuring for the design and construction of training and assessment centers.

(b) Coordination and nonduplication.—

(1) IN GENERAL.—The Secretary of Energy shall coordinate the program with the industrial research and assessment centers program and with other Federal programs to avoid duplication of effort.

(2) COLLOCATION.—To the maximum extent practicable, building, training, and assessment centers established under this section shall be collocated with Industrial Assessment Centers.

(c) Authorization of Appropriations.—There is authorized to be appropriated to carry out this section $10,000,000, to remain available until expended.

(a) Definition of eligible entity.—In this section, the term “eligible entity” means a nonprofit partnership that—

(1) includes the equal participation of industry, including public or private employers, and labor organizations, including joint labor-management training programs;

(2) may include workforce investment boards, community-based organizations, qualified service and conservation corps, educational institutions, small businesses, cooperatives, State and local veterans agencies, and veterans service organizations; and

(3) demonstrates—

(A) experience in implementing and operating worker skills training and education programs;

(B) the ability to identify and involve in training programs carried out under this section, target populations of individuals who would benefit from training and be actively involved in activities relating to energy efficiency and renewable energy industries; and

(C) the ability to help individuals achieve economic self-sufficiency.

(b) Establishment.—The Secretary of Energy shall award grants to eligible entities to pay the Federal share of associated career skills training programs under which students concurrently receive classroom instruction and on-the-job training for the purpose of obtaining an industry-related certification to install energy efficient buildings technologies, including technologies described in subsection (b)(3) of section 307 of the Energy Conservation and Production Act (42 U.S.C. 6836).

(c) Federal share.—The Federal share of the cost of carrying out a career skills training program described in subsection (a) shall be 50 percent.

(d) Authorization of Appropriations.—There is authorized to be appropriated to carry out this section $10,000,000, to remain available until expended.

Section 392 of the Energy Policy and Conservation Act (42 U.S.C. 6371a) is amended by adding at the end the following:

“(e) Coordination of energy retrofitting assistance for schools.—

“(1) DEFINITION OF SCHOOL.—Notwithstanding section 391(6), for the purposes of this subsection, the term ‘school’ means—

“(A) an elementary school or secondary school (as defined in section 9101 of the Elementary and Secondary Education Act of 1965 (20 U.S.C. 7801));

“(B) an institution of higher education (as defined in section 102(a) of the Higher Education Act of 1965 (20 U.S.C. 1002(a)));

“(C) a school of the defense dependents’ education system under the Defense Dependents’ Education Act of 1978 (20 U.S.C. 921 et seq.) or established under section 2164 of title 10, United States Code;

“(D) a school operated by the Bureau of Indian Affairs;

“(E) a tribally controlled school (as defined in section 5212 of the Tribally Controlled Schools Act of 1988 (25 U.S.C. 2511)); and

“(F) a Tribal College or University (as defined in section 316(b) of the Higher Education Act of 1965 (20 U.S.C. 1059c(b))).

“(2) ESTABLISHMENT OF CLEARINGHOUSE.—The Secretary, acting through the Office of Energy Efficiency and Renewable Energy, shall establish a clearinghouse to disseminate information regarding available Federal programs and financing mechanisms that may be used to help initiate, develop, and finance energy efficiency, distributed generation, and energy retrofitting projects for schools.

“(3) REQUIREMENTS.—In carrying out paragraph (2), the Secretary shall—

“(A) consult with appropriate Federal agencies to develop a list of Federal programs and financing mechanisms that are, or may be, used for the purposes described in paragraph (2); and

“(B) coordinate with appropriate Federal agencies to develop a collaborative education and outreach effort to streamline communications and promote available Federal programs and financing mechanisms described in subparagraph (A), which may include the development and maintenance of a single online resource that includes contact information for relevant technical assistance in the Office of Energy Efficiency and Renewable Energy that States, local education agencies, and schools may use to effectively access and use such Federal programs and financing mechanisms.”.

(a) Definitions.—In this section:

(1) ELIGIBLE ENTITY.—The term “eligible entity” means a consortium of—

(A) one local educational agency; and

(B) one or more—

(i) schools;

(ii) nonprofit organizations;

(iii) for-profit organizations; or

(iv) community partners that have the knowledge and capacity to partner and assist with energy improvements.

(2) ENERGY IMPROVEMENTS.—The term “energy improvements” means—

(A) any improvement, repair, or renovation, to a school that will result in a direct reduction in school energy costs including but not limited to improvements to building envelope, air conditioning, ventilation, heating system, domestic hot water heating, compressed air systems, distribution systems, lighting, power systems and controls;

(B) any improvement, repair, renovation, or installation that leads to an improvement in teacher and student health including but not limited to indoor air quality, daylighting, ventilation, electrical lighting, and acoustics; and

(C) the installation of renewable energy technologies (such as wind power, photovoltaics, solar thermal systems, geothermal energy, hydrogen-fueled systems, biomass-based systems, biofuels, anaerobic digesters, and hydropower) involved in the improvement, repair, or renovation to a school.

(b) Authority.—From amounts made available for grants under this section, the Secretary of Energy shall provide competitive grants to eligible entities to make energy improvements authorized by this section.

(c) Priority.—In making grants under this section, the Secretary shall give priority to eligible entities that have renovation, repair, and improvement funding needs and are—

(1) a high-need local educational agency, as defined in section 2102 of the Elementary and Secondary Education Act of 1965 (20 U.S.C. 6602); or

(2) a local educational agency designated with a metrocentric locale code of 41, 42, or 43, as determined by the National Center for Education Statistics (NCES), in conjunction with the Bureau of the Census, using the NCES system for classifying local educational agencies.

(d) Competitive criteria.—The competitive criteria used by the Secretary shall include the following:

(1) The fiscal capacity of the eligible entity to meet the needs for improvements of school facilities without assistance under this section, including the ability of the eligible entity to raise funds through the use of local bonding capacity and otherwise.

(2) The likelihood that the local educational agency or eligible entity will maintain, in good condition, any facility whose improvement is assisted.

(3) The potential energy efficiency and safety benefits from the proposed energy improvements.

(e) Applications.—To be eligible to receive a grant under this section, an applicant must submit to the Secretary an application that includes each of the following:

(1) A needs assessment of the current condition of the school and facilities that are to receive the energy improvements.

(2) A draft work plan of what the applicant hopes to achieve at the school and a description of the energy improvements to be carried out.

(3) A description of the applicant’s capacity to provide services and comprehensive support to make the energy improvements.

(4) An assessment of the applicant’s expected needs for operation and maintenance training funds, and a plan for use of those funds, if any.

(5) An assessment of the expected energy efficiency and safety benefits of the energy improvements.

(6) A cost estimate of the proposed energy improvements.

(7) An identification of other resources that are available to carry out the activities for which funds are requested under this section, including the availability of utility programs and public benefit funds.

(f) Use of grant amounts.—

(1) IN GENERAL.—The recipient of a grant under this section shall use the grant amounts only to make the energy improvements contemplated in the application, subject to the other provisions of this subsection.

(2) OPERATION AND MAINTENANCE TRAINING.—The recipient may use up to 5 percent for operation and maintenance training for energy efficiency and renewable energy improvements (such as maintenance staff and teacher training, education, and preventative maintenance training).

(3) AUDIT.—The recipient may use funds for a third-party investigation and analysis for energy improvements (such as energy audits and existing building commissioning).

(4) CONTINUING EDUCATION.—The recipient may use up to 1 percent of the grant amounts to develop a continuing education curriculum relating to energy improvements.

(g) Contracting requirements.—

(1) DAVIS-BACON.—Any laborer or mechanic employed by any contractor or subcontractor in the performance of work on any energy improvements funded by a grant under this section shall be paid wages at rates not less than those prevailing on similar construction in the locality as determined by the Secretary of Labor under subchapter IV of chapter 31 of title 40, United States Code (commonly referred to as the Davis-Bacon Act).

(2) COMPETITION.—Each applicant that receives funds shall ensure that, if the applicant carries out repair or renovation through a contract, any such contract process—

(A) ensures the maximum number of qualified bidders, including small, minority, and women-owned businesses, through full and open competition; and

(B) gives priority to businesses located in, or resources common to, the State or the geographical area in which the project is carried out.

(h) Reporting.—Each recipient of a grant under this section shall submit to the Secretary, at such time as the Secretary may require, a report describing the use of such funds for energy improvements, the estimated cost savings realized by those energy improvements, the results of any audit, the use of any utility programs and public benefit funds and the use of performance tracking for energy improvements (such as the Department of Energy: Energy Star program or LEED for Existing Buildings).

(i) Best practices.—The Secretary shall develop and publish guidelines and best practices for activities carried out under this section.

(j) Authorization of appropriations.—There is authorized to be appropriated to carry out this section $100,000,000 for each of fiscal years 2021 through 2025.

The Director of the National Institute of Standards and Technology shall—

(1) collect data following wildfires in the wildland-urban interface related to the influence of building materials on structural fires and how wind, terrain, and moisture affect wildland fires; and

(2) contribute to the scientific basis for analyzing economic outcomes of wildland-urban interface fire mitigation by conducting research on and developing metrics for the—

(A) relative contribution of moisture, weather, terrain, and infrastructure;

(B) losses and erosion of the forest floor resulting from wildfires in the wildland urban interface; and

(C) the performance of current designs, materials, and technologies used for—

(i) residential structures;

(ii) public and Federal government buildings;

(iii) electric grid infrastructure; and

(iv) other critical infrastructure.

The purposes of this part are—

(1) to establish a clear and consistent authority for industrial efficiency programs of the Department of Energy;

(2) to accelerate the deployment of technologies and practices that will increase industrial energy efficiency and improve productivity;

(3) to accelerate the development and demonstration of technologies that will assist the deployment goals of the industrial efficiency programs of the Department of Energy and increase manufacturing efficiency;

(4) to stimulate domestic economic growth and improve industrial productivity and competitiveness;

(5) to meet the future workforce needs of industry; and

(6) to strengthen partnerships between Federal and State governmental agencies and the private and academic sectors.

(a) Future of Industry program.—Section 452 of the Energy Independence and Security Act of 2007 (42 U.S.C. 17111) is amended—

(1) by striking the section heading and inserting the following: “Future of Industry program”;

(2) in subsection (a)(2)—

(A) by redesignating subparagraph (E) as subparagraph (F); and

(B) by inserting after subparagraph (D) the following:

“(E) water and wastewater treatment facilities, including systems that treat municipal, industrial, and agricultural waste; and”;

(3) by striking subsection (e); and

(4) by redesignating subsection (f) as subsection (e).

(b) Industrial research and assessment centers.—Subtitle D of title IV of the Energy Independence and Security Act of 2007 (42 U.S.C. 17111 et seq.) is amended by adding at the end the following:

(c) Clerical amendments.—The table of contents of the Energy Independence and Security Act of 2007 (42 U.S.C. prec. 17001) is amended—

(1) in the item relating to section 452, by striking “Energy-intensive industries program” and inserting “Future of industry program”; and

(2) by adding at the end of the items relating to subtitle D of title IV the following:

“Sec. 454. Industrial research and assessment centers.”.

(a) In general.—Part E of title III of the Energy Policy and Conservation Act (42 U.S.C. 6341 et seq.) is amended by adding at the end the following:

(b) Clerical amendment.—The table of contents of the Energy Policy and Conservation Act (42 U.S.C. prec. 6201) is amended by adding at the end of the items relating to part E of title III the following:

“Sec. 376. Sustainable manufacturing initiative.”.

(a) Section 106 of the Energy Policy Act of 2005 (42 U.S.C. 15811) and the item relating to such section in the table of contents of such Act are repealed.

(b) Sections 131, 132, 133, 2103, and 2107 of the Energy Policy Act of 1992 (42 U.S.C. 6348, 6349, 6350, 13453, 13456) and the items relating to such section in the table of contents of such Act are repealed.

(c) Section 2101(a) of the Energy Policy Act of 1992 (42 U.S.C. 13451(a)) is amended in the third sentence by striking “sections 2102, 2103, 2104, 2105, 2106, 2107, and 2108” and inserting “sections 2102, 2104, 2105, 2106, and 2108 of this Act and section 376 of the Energy Policy and Conservation Act,”.

(a) Definitions.—In this section:

(1) ELECTRIC MOTOR.—The term “electric motor” has the meaning given the term in section 431.12 of title 10, Code of Federal Regulations (as in effect on the date of enactment of this Act).

(2) ELECTRONIC CONTROL.—The term “electronic control” means—

(A) a power converter; or

(B) a combination of a power circuit and control circuit included on 1 chassis.

(3) EXTENDED PRODUCT SYSTEM.—The term “extended product system” means an electric motor and any required associated electronic control and driven load that—

(A) offers variable speed or multispeed operation;

(B) offers partial load control that reduces input energy requirements (as measured in kilowatt-hours) as compared to identified base levels set by the Secretary of Energy; and

(C) (i) has greater than 1 horsepower; and

(ii) uses an extended product system technology, as determined by the Secretary of Energy.

(4) QUALIFIED EXTENDED PRODUCT SYSTEM.—

(A) IN GENERAL.—The term “qualified extended product system” means an extended product system that—

(i) includes an electric motor and an electronic control; and

(ii) reduces the input energy (as measured in kilowatt-hours) required to operate the extended product system by not less than 5 percent, as compared to identified base levels set by the Secretary of Energy.

(B) INCLUSIONS.—The term “qualified extended product system” includes commercial or industrial machinery or equipment that—

(i) (I) did not previously make use of the extended product system prior to the redesign described in subclause (II); and

(II) incorporates an extended product system that has greater than 1 horsepower into redesigned machinery or equipment; and

(ii) was previously used prior to, and was placed back into service during, calendar year 2021 or 2022.

(b) Establishment.—Not later than 180 days after the date of enactment of this Act, the Secretary of Energy shall establish a program to provide rebates for expenditures made by qualified entities for the purchase or installation of a qualified extended product system.

(c) Qualified entities.—

(1) ELIGIBILITY REQUIREMENTS.—A qualified entity under this section shall be—

(A) in the case of a qualified extended product system described in subsection (a)(4)(A), the purchaser of the qualified extended product that is installed; and

(B) in the case of a qualified extended product system described in subsection (a)(4)(B), the manufacturer of the commercial or industrial machinery or equipment that incorporated the extended product system into that machinery or equipment.

(2) APPLICATION.—To be eligible to receive a rebate under this section, a qualified entity shall submit to the Secretary of Energy—

(A) an application in such form, at such time, and containing such information as the Secretary of Energy may require; and

(B) a certification that includes demonstrated evidence—

(i) that the entity is a qualified entity; and

(ii) (I) in the case of a qualified entity described in paragraph (1)(A)—

(aa) that the qualified entity installed the qualified extended product system during the 2 fiscal years following the date of enactment of this Act;

(bb) that the qualified extended product system meets the requirements of subsection (a)(4)(A); and

(cc) showing the serial number, manufacturer, and model number from the nameplate of the installed motor of the qualified entity on which the qualified extended product system was installed; or

(II) in the case of a qualified entity described in paragraph (1)(B), demonstrated evidence—

(aa) that the qualified extended product system meets the requirements of subsection (a)(4)(B); and

(bb) showing the serial number, manufacturer, and model number from the nameplate of the installed motor of the qualified entity with which the extended product system is integrated.

(d) Authorized amount of rebate.—

(1) IN GENERAL.—The Secretary of Energy may provide to a qualified entity a rebate in an amount equal to the product obtained by multiplying—

(A) an amount equal to the sum of the nameplate rated horsepower of—

(i) the electric motor to which the qualified extended product system is attached; and

(ii) the electronic control; and

(B) $25.

(2) MAXIMUM AGGREGATE AMOUNT.—A qualified entity shall not be entitled to aggregate rebates under this section in excess of $25,000 per calendar year.

(e) Authorization of appropriations.—There is authorized to be appropriated to carry out this section $5,000,000 for each of the first 2 full fiscal years following the date of enactment of this Act, to remain available until expended.

(a) Definitions.—In this section:

(1) QUALIFIED ENERGY EFFICIENT TRANSFORMER.—The term “qualified energy efficient transformer” means a transformer that meets or exceeds the applicable energy conservation standards described in the tables in subsection (b)(2) and paragraphs (1) and (2) of subsection (c) of section 431.196 of title 10, Code of Federal Regulations (as in effect on the date of enactment of this Act).

(2) QUALIFIED ENERGY INEFFICIENT TRANSFORMER.—The term “qualified energy inefficient transformer” means a transformer with an equal number of phases and capacity to a transformer described in any of the tables in subsection (b)(2) and paragraphs (1) and (2) of subsection (c) of section 431.196 of title 10, Code of Federal Regulations (as in effect on the date of enactment of this Act) that—

(A) does not meet or exceed the applicable energy conservation standards described in paragraph (1); and

(B) (i) was manufactured between January 1, 1987, and December 31, 2008, for a transformer with an equal number of phases and capacity as a transformer described in the table in subsection (b)(2) of section 431.196 of title 10, Code of Federal Regulations (as in effect on the date of enactment of this Act); or

(ii) was manufactured between January 1, 1992, and December 31, 2011, for a transformer with an equal number of phases and capacity as a transformer described in the table in paragraph (1) or (2) of subsection (c) of that section (as in effect on the date of enactment of this Act).

(3) QUALIFIED ENTITY.—The term “qualified entity” means an owner of industrial or manufacturing facilities, commercial buildings, or multifamily residential buildings, a utility, or an energy service company that fulfills the requirements of subsection (d).

(b) Establishment.—Not later than 90 days after the date of enactment of this Act, the Secretary of Energy shall establish a program to provide rebates to qualified entities for expenditures made by the qualified entity for the replacement of a qualified energy inefficient transformer with a qualified energy efficient transformer.

(c) Requirements.—To be eligible to receive a rebate under this section, an entity shall submit to the Secretary of Energy an application in such form, at such time, and containing such information as the Secretary of Energy may require, including demonstrated evidence—

(1) that the entity purchased a qualified energy efficient transformer;

(2) of the core loss value of the qualified energy efficient transformer;

(3) of the age of the qualified energy inefficient transformer being replaced;

(4) of the core loss value of the qualified energy inefficient transformer being replaced—

(A) as measured by a qualified professional or verified by the equipment manufacturer, as applicable; or

(B) for transformers described in subsection (a)(2)(B)(i), as selected from a table of default values as determined by the Secretary of Energy in consultation with applicable industry; and

(5) that the qualified energy inefficient transformer has been permanently decommissioned and scrapped.

(d) Authorized amount of rebate.—The amount of a rebate provided under this section shall be—

(1) for a 3-phase or single-phase transformer with a capacity of not less than 10 and not greater than 2,500 kilovolt-amperes, twice the amount equal to the difference in Watts between the core loss value (as measured in accordance with paragraphs (2) and (4) of subsection (c)) of—

(A) the qualified energy inefficient transformer; and

(B) the qualified energy efficient transformer; or

(2) for a transformer described in subsection (a)(2)(B)(i), the amount determined using a table of default rebate values by rated transformer output, as measured in kilovolt-amperes, as determined by the Secretary of Energy in consultation with applicable industry.

(e) Authorization of appropriations.—There is authorized to be appropriated to carry out this section $5,000,000 for each of fiscal years 2021 and 2022, to remain available until expended.

(f) Termination of effectiveness.—The authority provided by this section terminates on December 31, 2022.

(a) In general.—Subtitle C of title V of the Energy Independence and Security Act of 2007 (Public Law 110–140; 121 Stat. 1661) is amended by adding at the end the following:

(b) Conforming amendment.—The table of contents for the Energy Independence and Security Act of 2007 is amended by adding after the item relating to section 529 the following:

“Sec. 530. Energy-efficient and energy-saving information technologies.”.

Section 453 of the Energy Independence and Security Act of 2007 (42 U.S.C. 17112) is amended—

(1) in subsection (b)—

(A) in paragraph (2)(D)(iv), by striking “determined by the organization” and inserting “proposed by the stakeholders”; and

(B) by striking paragraph (3); and

(2) by striking subsections (c) through (g) and inserting the following:

“(c) Stakeholder involvement.—The Secretary and the Administrator shall carry out subsection (b) in collaboration with information technology industry and other key stakeholders, with the goal of producing results that accurately reflect the most relevant and useful information. In such collaboration, the Secretary and the Administrator shall pay particular attention to organizations that—

“(1) have members with expertise in energy efficiency and in the development, operation, and functionality of data centers, information technology equipment, and software, such as representatives of hardware manufacturers, data center operators, and facility managers;

“(2) obtain and address input from Department of Energy National Laboratories or any college, university, research institution, industry association, company, or public interest group with applicable expertise;

“(3) follow—

“(A) commonly accepted procedures for the development of specifications; and

“(B) accredited standards development processes; and

“(4) have a mission to promote energy efficiency for data centers and information technology.

“(d) Measurements and Specifications.—The Secretary and the Administrator shall consider and assess the adequacy of the specifications, measurements, best practices, and benchmarks described in subsection (b) for use by the Federal Energy Management Program, the Energy Star Program, and other efficiency programs of the Department of Energy or the Environmental Protection Agency.

“(e) Study.—The Secretary, in collaboration with the Administrator, shall, not later than 4 years after the date of enactment of the Clean Economy Jobs and Innovation Act, make available to the public an update to the report of the Lawrence Berkeley National Laboratory entitled ‘United States Data Center Energy Usage Report’ and dated June, 2016 (prepared as an update to the Report to Congress on Server and Data Center Energy Efficiency, published on August 2, 2007, under section 1 of Public Law 109–431 (120 Stat. 2920)), that includes—

“(1) a comparison and gap analysis of the estimates and projections contained in the report with new data regarding the period from 2015 through 2020;

“(2) an analysis considering the impact of information technologies, including virtualization and cloud computing, in the public and private sectors;

“(3) an evaluation of the impact of the combination of cloud platforms, mobile devices, social media, and big data on data center energy usage;

“(4) an evaluation of water usage in data centers and recommendations for reductions in such water usage; and

“(5) updated projections and recommendations for best practices through fiscal year 2025.

“(f) Data center energy practitioner program.—The Secretary, in collaboration with key stakeholders and the Director of the Office of Management and Budget, shall maintain a data center energy practitioner program that leads to the certification of energy practitioners qualified to evaluate the energy usage and efficiency opportunities in federally owned and operated data centers. Each Federal agency shall consider having the data centers of the agency evaluated every 4 years, in accordance with section 543(f) of the National Energy Conservation Policy Act, by energy practitioners certified pursuant to such program.

“(g) Open data initiative.—The Secretary, in collaboration with key stakeholders and the Office of Management and Budget, shall establish an open data initiative relating to energy usage at federally owned and operated data centers, with the purpose of making such data available and accessible in a manner that encourages further data center innovation, optimization, and consolidation. In establishing the initiative, the Secretary shall consider the use of the online Data Center Maturity Model.

“(h) International specifications and metrics.—The Secretary, in collaboration with key stakeholders, shall actively participate in efforts to harmonize global specifications and metrics for data center energy and water efficiency.

“(i) Data center utilization metric.—The Secretary, in collaboration with key stakeholders, shall facilitate in the development of an efficiency metric that measures the energy efficiency of a data center (including equipment and facilities).

“(j) Protection of proprietary information.—The Secretary and the Administrator shall not disclose any proprietary information or trade secrets provided by any individual or company for the purposes of carrying out this section or the programs and initiatives established under this section.”.

Section 436(h) of the Energy Independence and Security Act of 2007 (42 U.S.C. 17092(h)) is amended—

(1) in the subsection heading, by striking “system” and inserting “systems”;

(2) by striking paragraph (1) and inserting the following:

“(1) IN GENERAL.—Based on an ongoing review, the Federal Director shall identify and shall provide to the Secretary pursuant to section 305(a)(3)(D) of the Energy Conservation and Production Act (42 U.S.C. 6834(a)(3)(D)) a list of those certification systems that the Director identifies as the most likely to encourage a comprehensive and environmentally sound approach to certification of green buildings.”; and

(3) in paragraph (2)—

(A) in the matter preceding subparagraph (A), by striking “system” and inserting “systems”;

(B) by striking subparagraph (A) and inserting the following:

“(A) an ongoing review provided to the Secretary pursuant to section 305(a)(3)(D) of the Energy Conservation and Production Act (42 U.S.C. 6834(a)(3)(D)), which shall—

“(i) be carried out by the Federal Director to compare and evaluate standards; and

“(ii) allow any developer or administrator of a rating system or certification system to be included in the review;”;

(C) in subparagraph (E)(v), by striking “and” after the semicolon at the end;

(D) in subparagraph (F), by striking the period at the end and inserting a semicolon; and

(E) by adding at the end the following:

“(G) a finding that, for all credits addressing the sourcing of grown, harvested, or mined materials, the system rewards the use of products that have obtained certifications of responsible sourcing, such as certifications provided by the Sustainable Forestry Initiative, the Forest Stewardship Council, the American Tree Farm System, or the Programme for the Endorsement of Forest Certification; and

“(H) a finding that the system incorporates life-cycle assessment as a credit pathway.”.

(a) Findings.—Congress finds the following:

(1) The Federal Government is the largest energy user in the United States.

(2) Reducing energy and water use in Federal facilities—

(A) saves taxpayer dollars;

(B) reduces greenhouse gas emissions from the Federal sector; and

(C) increases employee comfort and productivity.

(3) It is important for the Federal Government to—

(A) develop goals for energy and water use reduction in Federal facilities; and

(B) to the maximum extent practicable, take measures that are life cycle cost effective.

(b) Sense of Congress.—It is the sense of Congress that Federal agencies should—

(1) for each of fiscal years 2020 through 2030, reduce average building energy intensity (as measured in British thermal units per gross square foot) at facilities of the agency by 2.5 percent each fiscal year, relative to the average building energy intensity of the facilities of the agency in fiscal year 2018; and

(2) for each of fiscal years 2020 through 2030, improve water use efficiency and management, including stormwater management, at facilities of the agency by reducing agency water consumption intensity—

(A) by reducing the potable water consumption by 54 percent by fiscal year 2030, relative to the potable water consumption of the agency in fiscal year 2007, through reductions of 2 percent each fiscal year (as measured in gallons per gross square foot);

(B) by reducing the industrial, landscaping, and agricultural water consumption of the agency, as compared to a baseline of that consumption by the agency in fiscal year 2010, through reductions of 2 percent each fiscal year (as measured in gallons); and

(C) by installing appropriate infrastructure features on federally owned property to improve stormwater and wastewater management.

(c) Energy management requirements.—Section 543 of the National Energy Conservation Policy Act (42 U.S.C. 8253) is amended by adding at the end the following:

“(h) Federal energy management program.—

“(1) IN GENERAL.—The Secretary shall carry out a program, to be known as the ‘Federal Energy Management Program’ (referred to in this subsection as the ‘Program’), to facilitate the implementation by the Federal Government of cost-effective energy and water management and energy-related investment practices—

“(A) to coordinate and strengthen Federal energy and water resilience; and

“(B) to promote environmental stewardship.

“(2) FEDERAL DIRECTOR.—The Secretary shall appoint an individual to serve as the director of the Program (referred to in this subsection as the ‘Federal Director’), which shall be a career position in the Senior Executive service, to administer the Program.

“(3) PROGRAM ACTIVITIES.—

“(A) STRATEGIC PLANNING AND TECHNICAL ASSISTANCE.—In administering the Program, the Federal Director shall—

“(i) provide technical assistance and project implementation support and guidance to agencies to identify, implement, procure, and track energy and water conservation measures required under this Act and under other provisions of law;

“(ii) in coordination with the Administrator of the General Services Administration, establish appropriate procedures, methods, and best practices for use by agencies to select, monitor, and terminate contracts entered into pursuant to a utility incentive program under section 546(c) with utilities;

“(iii) carry out the responsibilities of the Secretary under section 801, as determined appropriate by the Secretary;

“(iv) establish and maintain internet-based information resources and project tracking systems and tools for energy and water management;

“(v) coordinate comprehensive and strategic approaches to energy and water resilience planning for agencies; and

“(vi) establish a recognition program for Federal achievement in energy and water management, energy-related investment practices, environmental stewardship, and other relevant areas, through events such as individual recognition award ceremonies and public announcements.

“(B) ENERGY AND WATER MANAGEMENT AND REPORTING.—In administering the Program, the Federal Director shall—

“(i) track and report on the progress of agencies in meeting the requirements of the agency under this section;

“(ii) make publicly available agency performance data required under—

“(I) this section and sections 544, 546, 547, and 548; and

“(II) section 203 of the Energy Policy Act of 2005 (42 U.S.C. 15852);

“(iii) (I) collect energy and water use and consumption data from each agency; and

“(II) based on that data, submit to each agency a report that will facilitate the energy and water management, energy-related investment practices, and environmental stewardship of the agency in support of Federal goals under this Act and under other provisions of law;

“(iv) carry out the responsibilities of the Secretary under section 305 of the Energy Conservation and Production Act (42 U.S.C. 6834);

“(v) in consultation with the Administrator of the General Services Administration, acting through the head of the Office of High-Performance Green Buildings, establish and implement sustainable design principles for Federal facilities; and

“(vi) designate products that meet the highest energy conservation standards for categories not covered under the Energy Star program established under section 324A of the Energy Policy and Conservation Act (42 U.S.C. 6294a).

“(C) FEDERAL INTERAGENCY COORDINATION.—In administering the Program, the Federal Director shall—

“(i) develop and implement accredited training consistent with existing Federal programs and activities—

“(I) relating to energy and water use, management, and resilience in Federal facilities, energy-related investment practices, and environmental stewardship; and

“(II) that includes in-person training, internet-based programs, and national in-person training events;

“(ii) carry out the functions of the Secretary with respect to the Interagency Energy Management Task Force under section 547; and

“(iii) report on the implementation of the priorities of the President, including Executive orders, relating to energy and water use in Federal facilities, in coordination with—

“(I) the Office of Management and Budget;

“(II) the Council on Environmental Quality; and

“(III) any other entity, as considered necessary by the Federal Director.

“(D) FACILITY AND FLEET OPTIMIZATION.—In administering the Program, the Federal Director shall develop guidance, supply assistance to, and track the progress of agencies—

“(i) in conducting portfolio-wide facility energy and water resilience planning and project integration;

“(ii) in building new construction and major renovations to meet the sustainable design and energy and water performance standards required under this section;

“(iii) in developing guidelines for—

“(I) facility commissioning; and

“(II) facility operations and maintenance; and

“(iv) in coordination with the Administrator of the General Services Administration, in meeting statutory and agency goals for Federal fleet vehicles.

“(4) MANAGEMENT COUNCIL.—The Federal Director shall establish a management council to advise the Federal Director that shall—

“(A) convene not less frequently than once every quarter; and

“(B) consist of representatives from—

“(i) the Council on Environmental Quality;

“(ii) the Office of Management and Budget; and

“(iii) the Office of Federal High-Performance Green Buildings in the General Services Administration.

“(5) AUTHORIZATION OF APPROPRIATIONS.—There is authorized to be appropriated to the Secretary to carry out this subsection $36,000,000 for each of fiscal years 2021 through 2025.”.

(a) Definitions.—Section 303 of the Energy Conservation and Production Act (42 U.S.C. 6832) is further amended by adding at the end the following:

“(19) MAJOR RENOVATION.—The term ‘major renovation’ means a modification of the energy systems of a building that is sufficiently extensive to ensure that the entire building can achieve compliance with applicable energy standards for new buildings, as established by the Secretary.”.

(b) Federal Building Efficiency Standards.—Section 305 of the Energy Conservation and Production Act (42 U.S.C. 6834) is amended—

(1) in subsection (a)(3)—

(A) by striking “(3)(A) Not later than” and all that follows through subparagraph (B) and inserting the following:

“(3) REVISED FEDERAL BUILDING ENERGY EFFICIENCY PERFORMANCE STANDARDS; CERTIFICATION FOR GREEN BUILDINGS.—

“(A) REVISED FEDERAL BUILDING ENERGY EFFICIENCY PERFORMANCE STANDARDS.—

“(i) IN GENERAL.—Not later than 1 year after the date of enactment of the Clean Economy Jobs and Innovation Act, the Secretary shall establish, by regulation, revised Federal building energy efficiency performance standards that require that—

“(I) subject to clause (ii), new Federal buildings and Federal buildings with major renovations—

“(aa) meet or exceed the most recently published version of the International Energy Conservation Code (in the case of residential buildings) or ASHRAE Standard 90.1 (in the case of commercial buildings) as of the date of enactment of the Clean Economy Jobs and Innovation Act; and

“(bb) meet or exceed the energy provisions of the State and local building codes applicable to the building if the codes are more stringent than the most recently published version of the International Energy Conservation Code or ASHRAE Standard 90.1 as of the date of enactment of the Clean Economy Jobs and Innovation Act, as applicable;

“(II) unless demonstrated not to be life cycle cost-effective for new Federal buildings and Federal buildings with major renovations—

“(aa) the buildings shall be designed to achieve energy consumption levels that are not less than 30 percent below the levels established in the most recently published version of the International Energy Conservation Code or the ASHRAE Standard, as of the date of enactment of the Clean Economy Jobs and Innovation Act, as appropriate; and

“(bb) sustainable design principles are applied to the location, siting, design, and construction of all new Federal buildings and replacement Federal buildings;

“(III) if water is used to achieve energy efficiency, water conservation technologies shall be applied to the extent that the technologies are life-cycle cost effective; and

“(IV) if life-cycle cost effective, as compared to other reasonably available technologies, not less than 30 percent of the hot water demand for each new Federal building or Federal building undergoing a major renovation be met through the installation and use of solar hot water heaters.

“(ii) EXCEPTION.—Clause (i)(I) shall not apply to the unaltered portions of Federal buildings and systems that have undergone major renovations.

“(B) UPDATES.—Not later than 1 year after the date of approval of each subsequent revision of the ASHRAE Standard or the International Energy Conservation Code, as appropriate, the Secretary shall determine whether the revised standards established under subclauses (I) and (II) of subparagraph (A)(i) should be updated to reflect the revisions, based on the energy savings and life cycle cost-effectiveness of the revisions.”;

(B) in subparagraph (C), by striking “(C) In the budget request” and inserting the following:

“(C) BUDGET REQUEST.—In the budget request”; and

(C) in subparagraph (D)—

(i) by striking subclause (III) of clause (i);

(ii) by striking “(D) Not later than” and inserting the following:

“(D) STANDARDS; CERTIFICATION FOR GREEN BUILDINGS.—

“(i) STANDARDS.—Not later than”;

(iii) by striking “standards that require that:” and all that follows through “For new Federal buildings” and inserting “standards that require that, for new buildings”; and

(iv) by striking clauses (ii) through (vii) and inserting the following:

“(ii) SUSTAINABLE DESIGN PRINCIPLES.—Sustainable design principles shall be applied to the siting, design, and construction of buildings covered by this subparagraph.

“(iii) SELECTION OF CERTIFICATION SYSTEMS.—The Secretary, after reviewing the findings of the Federal Director under section 436(h) of the Energy Independence and Security Act of 2007 (42 U.S.C. 17092(h)), in consultation with the Administrator of General Services, and in consultation with the Secretary of Defense relating to those facilities under the custody and control of the Department of Defense, shall determine those certification systems for green commercial and residential buildings that the Secretary determines to be the most likely to encourage a comprehensive and environmentally sound approach to certification of green buildings.

“(iv) BASIS FOR SELECTION.—The determination of the certification systems under clause (iii) shall be based on ongoing review of the findings of the Federal Director under section 436(h) of the Energy Independence and Security Act of 2007 (42 U.S.C. 17092(h)) and the criteria described in clause (vi).

“(v) ADMINISTRATION.—In determining certification systems under this subparagraph, the Secretary shall—

“(I) make a separate determination for all or part of each system; and

“(II) confirm that the criteria used to support the selection of building products, materials, brands, and technologies—

“(aa) are based on relevant technical data;

“(bb) use and reward evaluation of health, safety, and environmental risks and impacts across the lifecycle of the building product, material, brand, or technology, including methodologies generally accepted by the applicable scientific disciplines;

“(cc) as practicable, give preference to performance standards instead of prescriptive measures; and

“(dd) reward continual improvements in the lifecycle management of health, safety, and environmental risks and impacts.

“(vi) CONSIDERATIONS.—In determining the green building certification systems under this subparagraph, the Secretary shall take into consideration—

“(I) the ability and availability of assessors and auditors to independently verify the criteria and measurement of metrics at the scale necessary to implement this subparagraph;

“(II) the ability of the applicable certification organization to collect and reflect public comment;

“(III) the ability of the standard to be developed and revised through a consensus-based process;

“(IV) an evaluation of the robustness of the criteria for a high-performance green building, which shall give credit for promoting—

“(aa) efficient and sustainable use of water, energy, and other natural resources;

“(bb) use of renewable energy sources;

“(cc) improved indoor environmental quality through enhanced indoor air quality, thermal comfort, acoustics, day lighting, pollutant source control, and use of low-emission materials and building system controls;

“(dd) the responsible sourcing of grown, harvested, or mined materials, including through certifications of responsible sourcing, such as certifications provided by the Forest Stewardship Council, the Sustainable Forestry Initiative, the American Tree Farm System, or the Programme for the Endorsement of Forest Certification; and

“(ee) such other criteria as the Secretary determines to be appropriate; and

“(V) national recognition within the building industry.

“(vii) REVIEW.—The Secretary, in consultation with the Administrator of General Services and the Secretary of Defense, shall conduct an ongoing review to evaluate and compare private sector green building certification systems, taking into account—

“(I) the criteria described in clause (vi); and

“(II) the identification made by the Federal Director under section 436(h) of the Energy Independence and Security Act of 2007 (42 U.S.C. 17092(h)).

“(viii) EXCLUSIONS.—

“(I) IN GENERAL.—Subject to subclause (II), if a certification system fails to meet the review requirements of clause (vi), the Secretary shall—

“(aa) identify the portions of the system, whether prerequisites, credits, points, or otherwise, that meet the review criteria of clause (vi);

“(bb) determine the portions of the system that are suitable for use; and

“(cc) exclude all other portions of the system from identification and use.

“(II) ENTIRE SYSTEMS.—The Secretary shall exclude an entire system from use if an exclusion under subclause (I)—

“(aa) impedes the integrated use of the system;

“(bb) creates disparate review criteria or unequal point access for competing materials; or

“(cc) increases agency costs of the use.

“(ix) INTERNAL CERTIFICATION PROCESSES.—The Secretary may by rule allow Federal agencies to develop internal certification processes, using certified professionals, in lieu of certification by certification entities identified under clause (iii).

“(x) PRIVATIZED MILITARY HOUSING.—With respect to privatized military housing, the Secretary of Defense, after consultation with the Secretary may, through rulemaking, develop alternative certification systems and levels than the systems and levels identified under clause (iii) that achieve an equivalent result in terms of energy savings, sustainable design, and green building performance.

“(xi) WATER CONSERVATION TECHNOLOGIES.—In addition to any use of water conservation technologies otherwise required by this section, water conservation technologies shall be applied to the extent that the technologies are life-cycle cost-effective.

“(xii) EFFECTIVE DATE.—

“(I) DETERMINATIONS MADE AFTER DECEMBER 31, 2020.—The amendments made by section 1422(b)(1)(C) of the Clean Economy Jobs and Innovation Act shall apply to any determination made by a Federal agency after December 31, 2020.

“(II) DETERMINATIONS MADE ON OR BEFORE DECEMBER 31, 2020.—This subparagraph (as in effect on the day before the date of enactment of the Clean Economy Jobs and Innovation Act) shall apply to any use of a certification system for green commercial and residential buildings by a Federal agency on or before December 31, 2020.”; and

(2) by striking subsections (c) and (d) and inserting the following:

“(c) Periodic review.—The Secretary shall—

“(1) once every 5 years, review the Federal building energy standards established under this section; and

“(2) on completion of a review under paragraph (1), if the Secretary determines that significant energy savings would result, upgrade the standards to include all new energy efficiency and renewable energy measures that are technologically feasible and economically justified.”.

(c) Federal compliance.—Section 306 of the Energy Conservation and Production Act (42 U.S.C. 6835) is amended—

(1) in subsection (a)—

(A) in paragraph (1)—

(i) by striking “(1) The head” and inserting the following:

“(1) IN GENERAL.—The head”; and

(ii) by striking “assure that new Federal buildings” and inserting “ensure that new Federal buildings and Federal buildings with major renovations”; and

(B) in paragraph (2)—

(i) by striking the second sentence and inserting the following:

“(B) PROCEDURES.—The Architect of the Capitol shall adopt procedures necessary to ensure that the buildings referred to in subparagraph (A) meet or exceed the standards described in that subparagraph.”; and

(ii) in the first sentence—

(I) by inserting “and Federal buildings with major renovations” after “new buildings”; and

(II) by striking “(2) The Federal” and inserting the following:

“(2) APPLICABILITY.—

“(A) IN GENERAL.—The Federal”; and

(2) in subsection (b)—

(A) by striking the subsection heading and inserting “Expenditures”; and

(B) by inserting “or a Federal building with major renovations” after “new Federal building”.

(a) Findings.—Congress finds the following:

(1) Performance contracting is a private financing tool with guaranteed energy savings and has been used by the Federal Government for nearly 30 years.

(2) Energy savings performance contracts and utility energy service contacts allow the Government to invest in infrastructure using private sector financing and expertise, with a guarantee of results.

(3) Use of performance contracting has saved the Government and taxpayers more than $18,000,000,000.

(4) By law, performance contracts are guaranteed to provide savings to Federal agencies.

(5) On average, performance contracts achieve savings in excess of the contractual and statutory guarantee.

(6) In a fiscally constrained environment, performance contracting helps to address the Federal Government’s backlog of maintenance and supplement scarce operations and maintenance dollars.

(7) The House of Representatives, the Senate, and the Office of Management and Budget have all acted to recognize the value of performance contracts by providing distinct budgetary consideration of them; in the 115th Congress, the House of Representatives included section 5109 in H. Con. Res. 71 to enable the greater use of performance contracting and to recognize their full cost savings benefits.

(8) Federal agencies are not taking full advantage of the cost-effective energy efficiency measures that are available and documented.

(9) Using performance contracts to carry out such energy efficiency measures would benefit taxpayers, the economy, and the environment.

(b) Reports.—Section 548(b) of the National Energy Conservation Policy Act (42 U.S.C. 8258(b)) is amended—

(1) in paragraph (3), by striking “and” at the end;

(2) in paragraph (4), by striking the period at the end and inserting “; and”; and

(3) by adding at the end the following:

“(5) (A) the status of the energy savings performance contracts and utility energy service contracts of each agency, to the extent that the information is not duplicative of information provided to the Secretary under a separate authority;

“(B) the quantity and investment value of the contracts for the previous year;

“(C) the guaranteed energy savings, or for contracts without a guarantee, the estimated energy savings, for the previous year, as compared to the measured energy savings for the previous year;

“(D) a forecast of the estimated quantity and investment value of contracts anticipated in the following year for each agency; and

“(E) (i) a comparison of the information described in subparagraph (B) and the forecast described in subparagraph (D) in the report of the previous year; and

“(ii) if applicable, the reasons for any differences in the data compared under clause (i).”.

In this subtitle:

(1) CONTRACTOR CERTIFICATION.—The term “contractor certification” means an industry recognized certification that may be obtained by a residential contractor to advance the expertise and education of the contractor in energy efficiency retrofits of residential buildings, including—

(A) a certification provided by—

(i) the Building Performance Institute;

(ii) the Air Conditioning Contractors of America;

(iii) the National Comfort Institute;

(iv) the North American Technician Excellence;

(v) RESNET;

(vi) the United States Green Building Council; or

(vii) Home Innovation Research Labs; and

(B) any other certification the Secretary determines appropriate for purposes of the Home Energy Savings Retrofit Rebate Program.

(2) CONTRACTOR COMPANY.—The term “contractor company” means a company—

(A) the business of which is to provide services to residential building owners with respect to HVAC systems, insulation, air sealing, or other services that are approved by the Secretary;

(B) that holds the licenses and insurance required by the State in which the company provides services; and

(C) that provides services for which a partial system rebate, measured performance rebate, or modeled performance rebate may be provided pursuant to the Home Energy Savings Retrofit Rebate Program.

(3) ENERGY AUDIT.—The term “energy audit” means an inspection, survey, and analysis of the energy use of a building, including the building envelope and HVAC system.

(4) HOME.—The term “home” means a manufactured home (as such term is defined in section 603 of the National Manufactured Housing Construction and Safety Standards Act of 1974 (42 U.S.C. 5402)), or a residential dwelling unit in a building with no more than 4 dwelling units that—

(A) is located in the United States;

(B) was constructed before the date of enactment of this Act; and

(C) is occupied at least 6 months out of the year.

(5) HOME ENERGY SAVINGS RETROFIT REBATE PROGRAM.—The term “Home Energy Savings Retrofit Rebate Program” means the Home Energy Savings Retrofit Rebate Program established under section 1521.

(6) HOMEOWNER.—The term “homeowner” means the owner of an owner-occupied home or a tenant-occupied home.

(7) HOME VALUATION CERTIFICATION.—The term “home valuation certification” means the following home assessments:

(A) Home Energy Score.

(B) PEARL Certification.

(C) National Green Building Standard.

(D) LEED.

(E) Any other assessment the Secretary determines to be appropriate.

(8) HOPE QUALIFICATION.—The term “HOPE Qualification” means the qualification described in section 1513.

(9) HOPE TRAINING CREDIT.—The term “HOPE training credit” means a HOPE training task credit or a HOPE training supplemental credit.

(10) HOPE TRAINING TASK CREDIT.—The term “HOPE training task credit” means a credit described in section 1512(a).

(11) HOPE TRAINING SUPPLEMENTAL CREDIT.—The term “HOPE training supplemental credit” means a credit described in section 1512(b).

(12) HVAC SYSTEM.—The term “HVAC system” means a system—

(A) consisting of a heating component, a ventilation component, and an air-conditioning component; and

(B) which components may include central air conditioning, a heat pump, a furnace, a boiler, a rooftop unit, and a window unit.

(13) MEASURED PERFORMANCE REBATE.—The term “measured performance rebate” means a rebate provided in accordance with section 1523 and described in subsection (e) of that section.

(14) MODELED PERFORMANCE REBATE.—The term “modeled performance rebate” means a rebate provided in accordance with section 1523 and described in subsection (d) of that section.

(15) MODERATE INCOME.—The term “moderate income” means, with respect to a household, a household with an annual income that is less than 80 percent of the area median income, as determined annually by the Department of Housing and Urban Development.

(16) MULTIFAMILY BUILDING.—The term “multifamily building” means a structure with 5 or more tenant-occupied residential dwelling units that—

(A) is located in the United States;

(B) was constructed before the date of enactment of this Act; and

(C) is occupied at least 6 months out of the year.

(17) MULTIFAMILY BUILDING OWNER.—The term “multifamily building owner” means the owner of a tenant-occupied multifamily building.

(18) PARTIAL SYSTEM REBATE.—The term “partial system rebate” means a rebate provided in accordance with section 1522.

(19) SECRETARY.—The term “Secretary” means the Secretary of Energy.

(20) STATE.—The term “State” includes—

(A) a State;

(B) the District of Columbia;

(C) the Commonwealth of Puerto Rico;

(D) Guam;

(E) American Samoa;

(F) the Commonwealth of the Northern Mariana Islands;

(G) the United States Virgin Islands; and

(H) any other territory or possession of the United States.

(21) STATE ENERGY OFFICE.—The term “State energy office” means the office or agency of a State responsible for developing the State energy conservation plan for the State under section 362 of the Energy Policy and Conservation Act (42 U.S.C. 6322).

Not later than 30 days after the date of enactment of this Act, the Secretary, acting through the Director of the Building Technologies Office of the Department of Energy, shall issue a notice that includes—

(1) criteria established under section 1512 for approval by the Secretary of courses for which credits may be issued for purposes of a HOPE Qualification;

(2) a list of courses that meet such criteria and are so approved; and

(3) information on how individuals and entities may apply for grants under this part.

(a) HOPE training task credit.—

(1) CRITERIA.—The Secretary shall establish criteria for approval of a course for which a credit, to be known as a HOPE training task credit, may be issued, including that such course—

(A) is equivalent to at least 30 hours in total course time;

(B) is accredited by the Interstate Renewable Energy Council or is determined to be equivalent by the Secretary;

(C) is, with respect to a particular job, aligned with the relevant National Renewable Energy Laboratory Job Task Analysis, or other credentialing program foundation that helps identify the necessary core knowledge areas, critical work functions, or skills, as approved by the Secretary;

(D) has established learning objectives; and

(E) includes, as the Secretary determines appropriate, an appropriate assessment of such learning objectives that may include a final exam, to be proctored on-site or through remote proctoring, or an in-person field exam.

(2) INCLUDED COURSES.—The Secretary shall approve one or more courses that meet the criteria described in paragraph (1) for training related to—

(A) contractor certification;

(B) energy auditing or assessment, including energy audits and assessments relevant to multifamily buildings;

(C) home and multifamily building energy systems (including HVAC systems);

(D) insulation installation and air leakage control;

(E) health and safety regarding the installation of energy efficiency measures or health and safety impacts associated with energy efficiency retrofits; and

(F) indoor air quality.

(b) HOPE training supplemental credit criteria.—The Secretary shall establish criteria for approval of a course for which a credit, to be known as a HOPE training supplemental credit, may be issued, including that such course provides—

(1) training related to—

(A) small business success, including management, home energy efficiency software, or general accounting principles;

(B) the issuance of a home valuation certification;

(C) the use of wifi-enabled technology in an energy efficiency upgrade; or

(D) understanding and being able to participate in the Home Energy Savings Retrofit Rebate Program; and

(2) as the Secretary determines appropriate, an appropriate assessment of such training that may include a final exam, to be proctored on-site or through remote proctoring, or an in-person field exam.

(c) Existing approved courses.—The Secretary may approve a course that meets the applicable criteria established under this section that is approved by the applicable State energy office or relevant State agency with oversight authority for residential energy efficiency programs.

(d) In-person and online training.—An online course approved pursuant to this section may be conducted in-person, but may not be offered exclusively in-person.

(a) Issuance of credits.—

(1) IN GENERAL.—The Secretary, or an entity authorized by the Secretary pursuant to paragraph (2), may issue—

(A) a HOPE training task credit to any individual that completes a course that meets applicable criteria under section 1512; and

(B) a HOPE training supplemental credit to any individual that completes a course that meets the applicable criteria under section 1512.

(2) OTHER ENTITIES.—The Secretary may authorize a State energy office implementing an authorized program under subsection (b)(2), an organization described in section 1514(b), and any other entity the Secretary determines appropriate, to issue HOPE training credits in accordance with paragraph (1).

(b) HOPE Qualification.—

(1) IN GENERAL.—The Secretary may certify that an individual has achieved a qualification, to be known as a HOPE Qualification, that indicates that the individual has received at least 3 HOPE training credits, of which at least 2 shall be HOPE training task credits.

(2) STATE PROGRAMS.—The Secretary may authorize a State energy office to implement a program to provide HOPE Qualifications in accordance with this part.

(a) In general.—The Secretary shall, to the extent amounts are made available in appropriations Acts for such purposes, provide grants to support the training of individuals toward the completion of a HOPE Qualification.

(b) Provider organizations.—

(1) IN GENERAL.—The Secretary may provide a grant of up to $20,000 under this section to an organization to provide training online, including establishing, modifying, or maintaining the online systems, staff time, and software and online program management, through a course that meets the applicable criteria established under section 1512.

(2) CRITERIA.—In order to receive a grant under this subsection, an organization shall be—

(A) a nonprofit organization;

(B) an educational institution; or

(C) an organization that has experience providing training to contractors that work with the weatherization assistance program implemented under part A of title IV of the Energy Conservation and Production Act (42 U.S.C. 6861 et seq.) or equivalent experience, as determined by the Secretary.

(3) ADDITIONAL CERTIFICATIONS.—In addition to any grant provided under paragraph (1), the Secretary may provide an organization up to $5,000 for each additional course for which a HOPE training credit may be issued that is offered by the organization.

(c) Contractor company.—The Secretary may provide a grant under this section of $1,000 per employee to a contractor company, up to a maximum of $10,000, to reimburse the contractor company for training costs for employees, and any home technology support needed for an employee to receive training pursuant to this section. Grant funds provided under this subsection may be used to support wages of employees during training.

(d) Trainees.—The Secretary may provide a grant of up to $1,000 under this section to an individual who receives a HOPE Qualification.

(e) State energy office.—The Secretary may provide a grant under this section to a State energy office of up to $25,000 to implement an authorized program under section 1513(b).

There is authorized to be appropriated to carry out this part $500,000,000 for the period of fiscal years 2021 through 2025, to remain available until expended.

The Secretary shall establish a program, to be known as the Home Energy Savings Retrofit Rebate Program, to—

(1) provide rebates in accordance with section 1522; and

(2) provide grants to States to carry out programs to provide rebates in accordance with section 1523.

(a) Amount of rebate.—In carrying out the Home Energy Savings Retrofit Rebate Program, and subject to the availability of appropriations for such purpose, the Secretary shall provide a homeowner or multifamily building owner a rebate, to be known as a partial system rebate, of, except as provided in section 1524, up to—

(1) $800 for the purchase and installation of insulation and air sealing within a home of the homeowner or the household living in a multifamily building; and

(2) $1,500 for the purchase and installation of insulation and air sealing within a home of the homeowner or the household living in a multifamily building and replacement of an HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system, of such home.

(b) Specifications.—

(1) COST.—The amount of a partial system rebate provided under this section shall, except as provided in section 1524, not exceed 30 percent of cost of the purchase and installation of insulation and air sealing under subsection (a)(1), or the purchase and installation of insulation and air sealing and replacement of an HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system, under subsection (a)(2). Labor may be included in such cost but may not exceed—

(A) in the case of a rebate under subsection (a)(1), 50 percent of such cost; and

(B) in the case of a rebate under subsection (a)(2), 25 percent of such cost.

(2) REPLACEMENT OF AN HVAC SYSTEM, THE HEATING COMPONENT OF AN HVAC SYSTEM, OR THE COOLING COMPONENT OF AN HVAC SYSTEM.—In order to qualify for a partial system rebate described in subsection (a)(2)—

(A) any HVAC system, heating component of an HVAC system, or cooling component of an HVAC system installed shall be Energy Star Most Efficient certified;

(B) installation of such an HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system, shall be completed in accordance with standards specified by the Secretary that are at least as stringent as the applicable guidelines of the Air Conditioning Contractors of America that are in effect on the date of enactment of this Act;

(C) if ducts are present, replacement of an HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system shall include duct sealing; and

(D) the installation of insulation and air sealing shall occur within 6 months of the replacement of the HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system.

(c) Additional incentives for contractors.—In carrying out the Home Energy Savings Retrofit Rebate Program, the Secretary may provide a $250 payment to a contractor per home of a homeowner or household living in a multifamily building for which—

(1) a partial system rebate is provided under this section for the installation of insulation and air sealing, or installation of insulation and air sealing and replacement of an HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system, by the contractor;

(2) the applicable homeowner has signed and submitted to the Secretary a release form made available pursuant to section 1526(b) authorizing the contractor access to information in the utility bills of the homeowner or the applicable multifamily building owner has signed and submitted an agreement with the contractor to provide whole-building aggregate information about the building’s energy use; and

(3) the contractor inputs, into the Department of Energy’s Building Performance Database—

(A) the energy usage for the home of a homeowner or for the household living in a multifamily building for the 12 months preceding, and the 24 months following, the installation of insulation and air sealing or installation of insulation and air sealing and replacement of an HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system;

(B) a description of such installation or installation and replacement; and

(C) the total cost to the homeowner or multifamily building owner for such installation or installation and replacement.

(d) Process.—

(1) FORMS; REBATE PROCESSING SYSTEM.—Not later than 90 days after the date of enactment of this Act, the Secretary, in consultation with the Secretary of the Treasury, shall—

(A) develop and make available rebate forms required to receive a partial system rebate under this section;

(B) establish a Federal rebate processing system which shall serve as a database and information technology system that will allow homeowners and multifamily building owners to submit required rebate forms; and

(C) establish a website that provides information on partial system rebates provided under this section, including how to determine whether particular measures qualify for a rebate under this section and how to receive such a rebate.

(2) SUBMISSION OF FORMS.—In order to receive a partial system rebate under this section, a homeowner or multifamily building owner shall submit the required rebate forms, and any other information the Secretary determines appropriate, to the Federal rebate processing system established pursuant to paragraph (1).

(e) Funding.—

(1) LIMITATION.—For each fiscal year, the Secretary may not use more than 50 percent of the amounts made available to carry out this part to carry out this section.

(2) ALLOCATION.—The Secretary shall allocate amounts made available to carry out this section for partial system rebates among the States using the same formula as is used to allocate funds for States under part D of title III of the Energy Policy and Conservation Act (42 U.S.C. 6321 et seq.).

(a) Funding.—In carrying out the Home Energy Savings Retrofit Rebate Program, and subject to the availability of appropriations for such purpose, the Secretary shall provide grants to States to carry out programs to provide rebates in accordance with this section.

(b) State participation.—

(1) PLAN.—In order to receive a grant under this section a State shall submit to the Secretary an application that includes a plan to implement a State program that meets the minimum criteria under subsection (c).

(2) APPROVAL.—Not later than 60 days after receipt of a completed application for a grant under this section, the Secretary shall either approve the application or provide to the applicant an explanation for denying the application.

(c) Minimum criteria for State programs.—Not later than 6 months after the date of enactment of this Act, the Secretary shall establish and publish minimum criteria for a State program to meet to qualify for funding under this section, including—

(1) that the State program be carried out by the applicable State energy office or its designee;

(2) that a rebate be provided under a State program only for a home energy efficiency retrofit that—

(A) is completed by a contractor who meets minimum training requirements and certification requirements set forth by the Secretary;

(B) includes installation of one or more home energy efficiency retrofit measures for a home that together are modeled to achieve, or are shown to achieve, a reduction in home energy use of 20 percent or more from the baseline energy use of the home;

(C) does not include installation of any measure that the Secretary determines does not improve the thermal energy performance of the home, such as a pool pump, pool heater, spa, or EV charger; and

(D) includes, after installation of the applicable home energy efficiency retrofit measures, a test-out procedure conducted in accordance with guidelines issued by the Secretary of such measures to ensure—

(i) the safe operation of all systems post retrofit; and

(ii) that all improvements are included in, and have been installed according to—

(I) manufacturers installation specifications; and

(II) all applicable State and local codes or equivalent standards approved by the Secretary;

(3) that the State program utilize—

(A) for purposes of modeled performance rebates, modeling software approved by the Secretary for determining and documenting the baseline energy use of a home and the reductions in home energy use resulting from the implementation of a home energy efficiency retrofit; and

(B) for purposes of measured performance rebates, methods and procedures approved by the Secretary for determining and documenting the baseline energy use of a home and the reductions in home energy use resulting from the implementation of a home energy efficiency retrofit, including methods and procedures for use of advanced metering infrastructure, weather-normalized data, and open source standards, to measure such baseline energy use and such reductions in home energy use;

(4) that the State program include implementation of a quality assurance program—

(A) to ensure that home energy efficiency retrofits are achieving the stated level of energy savings, that efficiency measures were installed correctly, and that work is performed in accordance with procedures developed by the Secretary, including through quality-control inspections for a portion of home energy efficiency retrofits completed by each applicable contractor; and

(B) under which a quality-control inspection of a home energy efficiency retrofit is performed by a quality assurance provider who—

(i) is independent of the contractor for such retrofit; and

(ii) will confirm that such contractor is a contractor who meets minimum training requirements and certification requirements set forth by the Secretary;

(5) that the State program include requirements for a homeowner, contractor, or rebate aggregator to claim a rebate, including that the homeowner, contractor, or rebate aggregator submit any applicable forms approved by the Secretary to the State, including a copy of the certificate provided by the applicable contractor certifying projected or measured reduction of home energy use;

(6) that the State program may include requirements for an entity to be eligible to serve as a rebate aggregator to facilitate the delivery of rebates to homeowners or contractors;

(7) that the State program include procedures for a homeowner to transfer the right to claim a rebate to the contractor performing the applicable home energy efficiency retrofit or to a rebate aggregator that works with the contractor; and

(8) that the State program provide that a homeowner, contractor, or rebate aggregator may claim more than one rebate under the State program, and may claim a rebate under the State program after receiving a partial system rebate under section 1522, provided that no 2 rebates may be provided with respect to a home using the same baseline energy use of such home.

(d) Modeled performance rebates.—

(1) IN GENERAL.—In carrying out a State program under this section, a State may provide a homeowner, contractor, or rebate aggregator a rebate, to be known as a modeled performance rebate, for an energy audit of a home and a home energy efficiency retrofit that is projected, using modeling software approved by the Secretary, to reduce home energy use by at least 20 percent.

(2) AMOUNT.—

(A) IN GENERAL.—Except as provided in section 1524, and subject to subparagraph (B), the amount of a modeled performance rebate provided under a State program shall be equal to 50 percent of the cost of the applicable energy audit of a home and home energy efficiency retrofit, including the cost of diagnostic procedures, labor, reporting, and modeling.

(B) LIMITATION.—Except as provided in section 1524, with respect to an energy audit and home energy efficiency retrofit that is projected to reduce home energy use by—

(i) at least 20 percent, but less than 40 percent, the maximum amount of a modeled performance rebate shall be $2,000; and

(ii) at least 40 percent, the maximum amount of a modeled performance rebate shall be $4,000.

(e) Measured performance rebates.—

(1) IN GENERAL.—In carrying out a State program under this section, a State may provide a homeowner, contractor, or rebate aggregator a rebate, to be known as a measured performance rebate, for a home energy efficiency retrofit that reduces home energy use by at least 20 percent as measured using methods and procedures approved by the Secretary.

(2) AMOUNT.—

(A) IN GENERAL.—Except as provided in section 1524, and subject to subparagraph (B), the amount of a measured performance rebate provided under a State program shall be equal to 50 percent of the cost, including the cost of diagnostic procedures, labor, reporting, and energy measurement, of the applicable home energy efficiency retrofit.

(B) LIMITATION.—Except as provided in section 1524, with respect to a home energy efficiency retrofit that is measured as reducing home energy use by—

(i) at least 20 percent, but less than 40 percent, the maximum amount of a measured performance rebate shall be $2,000; and

(ii) at least 40 percent, the maximum amount of a measured performance rebate shall be $4,000.

(f) Coordination of rebate and existing State-sponsored or utility-sponsored programs.—A State that receives a grant under this section is encouraged to work with State agencies, energy utilities, nonprofits, and other entities—

(1) to assist in marketing the availability of the rebates under the applicable State program;

(2) to coordinate with utility or State managed financing programs;

(3) to assist in implementation of the applicable State program, including installation of home energy efficiency retrofits; and

(4) to coordinate with existing quality assurance programs.

(g) Administration and oversight.—

(1) REVIEW OF APPROVED MODELING SOFTWARE.—The Secretary shall, on an annual basis, list and review all modeling software approved for use in determining and documenting the reductions in home energy use for purposes of modeled performance rebates under subsection (d). In approving such modeling software each year, the Secretary shall ensure that modeling software approved for a year will result in modeling of energy efficiency gains for any type of home energy efficiency retrofit that is at least as substantial as the modeling of energy efficiency gains for such type of home energy efficiency retrofit using the modeling software approved for the previous year.

(2) OVERSIGHT.—If the Secretary determines that a State is not implementing a State program that was approved pursuant to subsection (b) and that meets the minimum criteria under subsection (c), the Secretary may, after providing the State a period of at least 90 days to meet such criteria, withhold grant funds under this section from the State.

(a) Certifications.—The Secretary shall establish procedures for certifying that the household of a homeowner or that, in the case of a multifamily building, the majority of households in the building is moderate income for purposes of this section.

(b) Percentages.—Subject to subsection (c), for households that are certified pursuant to the procedures established under subsection (a) as moderate income the—

(1) amount of a partial system rebate under section 1522 shall not exceed 60 percent of the applicable purchase and installation costs described in section 1522(b)(1); and

(2) amount of—

(A) a modeled performance rebate under section 1523 provided shall be equal to 80 percent of the applicable costs described in section 1523(d)(2)(A); and

(B) a measured performance rebate under section 1523 provided shall be equal to 80 percent of the applicable costs described in section 1523(e)(2)(A).

(c) Maximum amounts.—For households that are certified pursuant to the procedures established under subsection (a) as moderate income the maximum amount—

(1) of a partial system rebate—

(A) under section 1522(a)(1) for the purchase and installation of insulation and air sealing within a home of the homeowner or the household living in a multifamily building shall be $1600; and

(B) under section 1522(a)(2) for the purchase and installation of insulation and air sealing within a home of the homeowner or the household living in a multifamily building and replacement of an HVAC system, the heating component of an HVAC system, or the cooling component of an HVAC system, of such home, shall be $3,000;

(2) of a modeled performance rebate under section 1523 for an energy audit and home energy efficiency retrofit that is projected to reduce home energy use as described in—

(A) section 1523(d)(2)(B)(i) shall be $4,000; and

(B) section 1523(d)(2)(B)(ii) shall be $8,000; and

(3) of a measured performance rebate under section 1523 for a home energy efficiency retrofit that reduces home energy use as described in—

(B) section 1523(e)(2)(B)(i) shall be $4,000; and

(C) section 1523(e)(2)(B)(ii) shall be $8,000.

(d) Outreach.—The Secretary shall establish procedures to—

(1) provide information to households of homeowners or multifamily building owners that are certified pursuant to the procedures established under subsection (a) as moderate income regarding other programs and resources relating to assistance for energy efficiency upgrades of homes, including the weatherization assistance program implemented under part A of title IV of the Energy Conservation and Production Act (42 U.S.C. 6861 et seq.); and

(2) refer such households and owners, as applicable, to such other programs and resources.

(a) In general.—Not later than 3 years after the date of enactment of this Act and annually thereafter until the termination of the Home Energy Savings Retrofit Rebate Program, the Secretary shall submit to Congress a report on the use of funds made available to carry out this part.

(b) Contents.—Each report submitted under subsection (a) shall include—

(1) how many home energy efficiency retrofits have been completed during the previous year under the Home Energy Savings Retrofit Rebate Program;

(2) an estimate of how many jobs have been created through the Home Energy Savings Retrofit Rebate Program, directly and indirectly;

(3) a description of what steps could be taken to promote further deployment of energy efficiency and renewable energy retrofits;

(4) a description of the quantity of verifiable energy savings, homeowner energy bill savings, and other benefits of the Home Energy Savings Retrofit Rebate Program;

(5) a description of any waste, fraud, or abuse with respect to funds made available to carry out this part; and

(6) any other information the Secretary considers appropriate.

(a) In general.—The Secretary shall provide such administrative and technical support to contractors, rebate aggregators, States, and Indian Tribes as is necessary to carry out this part.

(b) Information collection.—The Secretary shall establish, and make available to a homeowner, or the homeowner’s designated representative, seeking a rebate under this part, release forms authorizing access by the Secretary, or a designated third-party representative to information in the utility bills of the homeowner with appropriate privacy protections in place.

(c) Application of wage rate requirements to partial system and state administered rebates.—Section 12202 of this Act shall not apply to rebates under sections 1522 and 1523.

(a) In general.—There are authorized to be appropriated to the Secretary to carry out this part $1,600,000,000 for each of fiscal years 2021 through 2025, to remain available until expended.

(b) Tribal allocation.—Of the amounts made available pursuant to subsection (a) for a fiscal year, the Secretary shall work with Indian Tribes and use 2 percent of such amounts to carry out a program or programs that as close as possible reflect the goals, requirements, and provisions of this part, taking into account any factors that the Secretary determines to be appropriate.

Notwithstanding the provisions of title 5, United States Code, regarding appointments in the competitive service and General Schedule classifications and pay rates, the Secretary may appoint such professional and administrative personnel as the Secretary considers necessary to carry out this subtitle.

Each State receiving Federal funds pursuant to this subtitle shall provide reasonable assurances to the Secretary that it has established policies and procedures designed to ensure that Federal funds provided under this subtitle will be used to supplement, and not to supplant, State and local funds.

(a) Reauthorization Of Weatherization Assistance Program.—Section 422 of the Energy Conservation and Production Act (42 U.S.C. 6872) is amended by striking paragraphs (1) through (5) and inserting the following:

“(1) $410,000,000 for fiscal year 2021;

“(2) $430,000,000 for fiscal year 2022;

“(3) $450,000,000 for fiscal year 2023;

“(4) $450,000,000 for fiscal year 2024; and

“(5) $450,000,000 for fiscal year 2025.”.

(b) Modernizing the definition of weatherization materials.—Section 412(9)(J) of the Energy Conservation and Production Act (42 U.S.C. 6862(9)(J)) is amended—

(1) by inserting “, including renewable energy technologies and other advanced technologies,” after “devices or technologies”; and

(2) by striking “, after consulting with the Secretary of Housing and Urban Development, the Secretary of Agriculture, and the Director of the Community Services Administration”.

(c) Consideration of health benefits.—Section 413(b) of the Energy Conservation and Production Act (42 U.S.C. 6863(b)) is amended—

(1) in paragraph (1), by striking “Health, Education, and Welfare” and inserting “Health and Human Services”;

(2) in paragraph (2)(A), by striking “Health, Education, and Welfare” and inserting “Health and Human Services”;

(3) in paragraph (3)—

(A) by striking “and with the Director of the Community Services Administration”;

(B) by inserting “and by” after “in carrying out this part,”; and

(C) by striking “, and the Director of the Community Services Administration in carrying out weatherization programs under section 222(a)(12) of the Economic Opportunity Act of 1964”;

(4) by redesignating paragraphs (4) through (6) as paragraphs (5) through (7), respectively; and

(5) by inserting after paragraph (3), the following:

“(4) The Secretary may amend the regulations prescribed under paragraph (1) to provide that the standards described in paragraph (2)(A) take into consideration improvements in the health and safety of occupants of dwelling units, and other non-energy benefits, from weatherization.”.

(d) Contractor optimization.—

(1) IN GENERAL.—The Energy Conservation and Production Act is amended by inserting after section 414B (42 U.S.C. 6864b) the following:

(2) TABLE OF CONTENTS AMENDMENT.—The table of contents for the Energy Conservation and Production Act is amended by inserting after the item relating to section 414B the following:

“Sec. 414C. Contractor optimization.”.

(e) Financial assistance for WAP enhancement and innovation.—

(1) IN GENERAL.—The Energy Conservation and Production Act is amended by inserting after section 414C (as added by subsection (d) of this section) the following:

Not later than 180 days after the date of enactment of this Act, the Secretary of Energy shall submit to Congress a report on the status of any request made after September 30, 2010, for a waiver of any requirement under section 200.313 of title 2, Code of Federal Regulations, as such requirement applies with respect to the weatherization assistance program under part A of title IV of the Energy Conservation and Production Act (42 U.S.C. 6861 et seq.), including a description of any such waiver that has been granted and any such request for a waiver that has been considered but not granted.

With respect to the Weatherization Assistance Program, the requirements of section 12202 shall apply only to work performed on multifamily buildings.

Thermal insulating materials for building elements including walls, floors, ceilings, attics and roofs insulation, used for “Low Income Home Energy Assistance” and “Weatherization Assistance Program” shall not contain any substance that is a Category 1 respiratory sensitizer as defined in Appendix A to section 1910.1200 of title 29, Code of Federal Regulations, (specifically, Appendix A.4, “Respiratory or Skin Sensitization”), if such substance was intentionally added or is present at greater than 0.1 percent (1000 ppm) by weight in the product.