(a) Short title.—This Act may be cited as the “Protecting Our Kids Act”.

(b) Table of contents.—The table of contents for this Act is as follows:

Sec. 1. Short title; table of contents.

(a) In general.—Section 922(b)(1) of title 18, United States Code, is amended to read as follows:

“(1) (A) any firearm or ammunition to any individual who the licensee knows or has reasonable cause to believe has not attained 18 years of age;

“(B) any semiautomatic centerfire rifle or semiautomatic centerfire shotgun that has, or has the capacity to accept, an ammunition feeding device with a capacity exceeding 5 rounds, to any individual who the licensee knows or has reasonable cause to believe has not attained 21 years of age and is not a qualified individual; or

“(C) if the firearm or ammunition is not a semiautomatic centerfire rifle or semiautomatic centerfire shotgun described in subparagraph (B) and is other than a shotgun or rifle, or ammunition for a shotgun or rifle, to any individual who the licensee knows or has reasonable cause to believe has not attained 21 years of age;”.

(b) Conforming amendment.—Section 922(c)(1) of such title is amended by striking “in the case of any firearm” and all that follows through “eighteen years or more of age” and inserting “(1) in the case of a semiautomatic centerfire rifle or semiautomatic centerfire shotgun that has, or has the capacity to accept, an ammunition feeding device with a capacity exceeding 5 rounds, I am at least 21 years of age or a qualified individual (as defined in section 921(a)(30) of title 18, United States Code), (2) in the case of a firearm other than a shotgun, a rifle, or such a semiautomatic centerfire rifle or semiautomatic centerfire shotgun, I am at least 21 years of age, or (3) in the case of any other shotgun or rifle, I am at least 18 years of age”.

(c) Qualified individual defined.—Section 921(a) of such title is amended by inserting after paragraph (29) the following:

“(30) The term ‘qualified individual’ means—

“(A) a member of the Armed Forces on active duty; and

“(B) a full-time employee of the United States, a State, or a political subdivision of a State who in the course of his or her official duties is authorized to carry a firearm.

“(31) The term ‘ammunition feeding device’ means a magazine, belt, drum, feed strip, or similar device, but does not include an attached tubular device which is only capable of operating with .22 caliber rimfire ammunition.”.

(a) Report.—Not later than 90 days after the date of the enactment of this Act, the Director of the Federal Bureau of Investigation (in this section referred to as the “FBI”) shall submit to the Committee on the Judiciary of the Senate and the Committee on the Judiciary of the House of Representatives a report regarding operation of the FBI’s public access line.

(b) Matters included.—The report required by subsection (a) shall, at a minimum, include the following:

(1) A description of the protocols and procedures in effect with respect to information-sharing between the public access line and the field offices of the FBI.

(2) Recommendations for improving the protocols and procedures to improve the information-sharing.

(a) In general.—Chapter 44 of title 18, United States Code, is amended—

(1) in section 921(a), by adding at the end the following:

“(37) The term ‘family members’ means spouses, domestic partners, parents and their children, including step-parents and their step-children, siblings, aunts or uncles and their nieces or nephews, or grandparents and their grandchildren.”; and

(2) by adding at the end the following:

(b) Forfeiture.—Section 982(a)(5) of such title is amended—

(1) in subparagraph (D), by striking “or” at the end; and

(2) by inserting after subparagraph (E) the following:

“(F) section 922(a)(1)(A) (related to unlicensed firearms sales);

“(G) section 922(d) (relating to illegal gun transfers); or

“(H) section 932 (relating to gun trafficking),”.

(c) Money laundering amendment.—Section 1956(c)(7)(D) of such title is amended by striking “section 924(n)” and inserting “section 922(a)(1)(A), 922(d), 924(n), or 932”.

(d) Clerical amendment.—The table of sections for such chapter is amended by adding at the end the following:

“932. Gun trafficking.”.

Section 922(d) of title 18, United States Code, is amended in the 1st sentence—

(1) in paragraph (8), by striking “or” at the end;

(2) in paragraph (9), by striking the period at the end and inserting “; or”; and

(3) by inserting after and below paragraph (9) the following:

“(10) intends to sell or otherwise dispose of the firearm or ammunition in violation of a Federal law, or to sell or otherwise dispose of the firearm or ammunition to a person in another State in violation of a law of that State.”.

Section 924(a) of title 18, United States Code, is amended by adding at the end the following:

“(8) Whoever knowingly violates section 922(a)(1)(A) or 932 shall be fined under this title, imprisoned not more than 10 years, or both.”.

Section 924(d) of title 18, United States Code, is amended—

(1) in paragraph (1), by inserting “or 932” after “section 924”; and

(2) in paragraph (3)—

(A) in subparagraph (E), by striking “and” at the end;

(B) in subparagraph (F), by striking the period at the end and inserting “; and”; and

(C) by adding at the end the following:

“(G) any offense under section 932.”.

(a) Definitions.—Section 921(a) of title 18, United States Code, as amended by this Act, is further amended—

(1) in paragraph (10), by adding at the end the following: “The term ‘manufacturing firearms’ shall include assembling a functional firearm or molding, machining, or 3D printing a frame or receiver, and shall not include making or fitting special barrels, stocks, or trigger mechanisms to firearms.”; and

(2) by adding at the end the following:

“(38) The term ‘ghost gun’—

“(A) means a firearm, including a frame or receiver, that lacks a unique serial number engraved or cast on the frame or receiver by a licensed manufacturer or importer in accordance with this chapter; and

“(B) does not include—

“(i) a firearm that has been rendered permanently inoperable;

“(ii) a firearm that, not later than 30 months after the date of enactment of this paragraph, has been identified by means of a unique serial number, assigned by a State agency, engraved or cast on the receiver or frame of the firearm in accordance with State law;

“(iii) a firearm manufactured or imported before December 16, 1968; or

“(iv) a firearm identified as provided for under section 5842 of the Internal Revenue Code of 1986.

“(39) The term ‘fire control component’—

“(A) means a component necessary for the firearm to initiate or complete the firing sequence; and

“(B) includes a hammer, bolt or breechblock, cylinder, trigger mechanism, firing pin, striker, and slide rails.

“(40) (A) The term ‘frame or receiver’—

“(i) means a part of a weapon that provides or is intended to provide the housing or structure to hold or integrate 1 or more fire control components, even if pins or other attachments are required to connect those components to the housing or structure;

“(ii) includes a frame or receiver, blank, casting, or machined body, that requires modification, including machining, drilling, filing or molding, to be used as part of a functional firearm, and which is designed and intended to be used in the assembly of a functional firearm, unless the piece of material has had—

“(I) its size or external shape altered solely to facilitate transportation or storage; or

“(II) solely its chemical composition altered.

“(B) For purposes of subparagraph (A)(i), if a weapon with more than 1 part that provides the housing or a structure designed to hold or integrate 1 or more fire control or essential components, each such part shall be considered a frame or receiver, unless the Attorney General has provided otherwise by regulation or other formal determination with respect to the specific make and model of weapon on or before January 1, 2023.”.

(b) Prohibition; requirements.—Section 922 of title 18, United States Code, is amended by adding at the end the following:

“(aa) (1) (A) Except as provided in subparagraph (B), it shall be unlawful for any person to manufacture, sell, offer to sell, transfer, purchase, or receive a ghost gun in or affecting interstate or foreign commerce.

“(B) Subparagraph (A) shall not apply to—

“(i) the manufacture of a firearm by a licensed manufacturer if the licensed manufacturer complies with section 923(i) before selling or transferring the firearm to another person;

“(ii) the offer to sell, sale, or transfer of a firearm to, or purchase or receipt of a firearm by, a licensed manufacturer or importer before the date that is 30 months after the date of enactment of this subsection; or

“(iii) transactions between licensed manufacturers and importers on any date.

“(2) It shall be unlawful for a person other than a licensed manufacturer or importer to engrave or cast a serial number on a firearm in or affecting interstate or foreign commerce unless specifically authorized by the Attorney General.

“(3) Beginning on the date that is 30 months after the date of enactment of this subsection, it shall be unlawful for any person other than a licensed manufacturer or importer to knowingly possess a ghost gun in or affecting interstate or foreign commerce.

“(4) Beginning on the date that is 30 months after the date of enactment of this subsection, it shall be unlawful for any person other than a licensed manufacturer or importer to possess a ghost gun in or affecting interstate or foreign commerce with the intent to sell or transfer the ghost gun with or without further manufacturing or to manufacture a firearm with the ghost gun.

“(5) (A) It shall be unlawful for any person to sell, offer to sell, or transfer, in or affecting interstate or foreign commerce, to any person other than a licensed manufacturer a machine that has the sole or primary function of manufacturing firearms.

“(B) Except as provided in subparagraph (A), beginning on the date that is 180 days after the date of enactment of this subsection, it shall be unlawful for any person other than a licensed manufacturer to possess, purchase, or receive, in or affecting interstate or foreign commerce, a machine that has the sole or primary function of manufacturing firearms.

“(C) Subparagraph (B) shall not apply to a person who is engaged in the business of selling manufacturing equipment to a licensed manufacturer who possesses a machine with the intent to sell or transfer the machine to a licensed manufacturer.”.

(c) Requirements.—

(1) REMOVAL OF SERIAL NUMBERS.—Section 922(k) of title 18, United States Code, is amended—

(A) by striking “importer's or manufacturer's” each place it appears; and

(B) by inserting “authorized by this chapter or under State law” before “removed” each place it appears.

(2) LICENSED IMPORTERS AND MANUFACTURERS.—Section 923(i) of title 18, United States Code, is amended—

(A) by inserting “(1)(A)” before “Licensed”; and

(B) by adding at the end the following: “The serial number shall be engraved or cast on the frame or receiver in a manner sufficient to identify the firearm and the manufacturer or importer that put the serial number on the firearm.

“(2) (A) Not later than 180 days after the date of enactment of this paragraph, the Attorney General shall prescribe regulations for engraving a unique serial number onto a ghost gun.

“(B) The regulations prescribed under subparagraph (A) shall—

“(i) allow an owner of a firearm described in subparagraph (A) to have a unique serial number engraved on the firearm by a licensed manufacturer or importer; and

“(ii) require that a serial number be engraved on the frame or receiver in a manner sufficient to identify the firearm and the licensed manufacturer or importer that put the serial number on the firearm.

“(C) The regulations authorized under this paragraph shall expire on the date that is 30 months after the date of enactment of this paragraph.”.

(d) Penalties.—Section 924 of title 18, United States Code, is amended—

(1) in subsection (a)(1)(B), by striking “or (q)” and inserting “(q), (aa)(1), (aa)(2), (aa)(4), or (aa)(5)”;

(2) in subsection (c)

(A) in paragraph (1)—

(i) in subparagraph (A), in the matter preceding clause (i), by inserting “functional” before “firearm” each place it appears;

(ii) in subparagraph (B), in the matter preceding clause (i), by inserting “functional” before “firearm”; and

(iii) in subparagraph (D)(ii), by inserting “functional” before “firearm”; and

(B) in paragraph (4), by striking “all or part of the firearm” and all that follows through “person.” and inserting the following: “all or part of the functional firearm, or otherwise make the presence of the functional firearm known to another person, in order to intimidate that person, regardless of whether the functional firearm is directly visible to that person.”;

(3) in subsection (d)(1), by striking “or (k)” and inserting “(k), (aa)(1), (aa)(2), (aa)(4), or (aa)(5)”;

(4) in subsection (e)(1), by inserting “through the possession of a functional firearm” before “and has three”; and

(5) by adding at the end the following:

“(q) A person who violates section 922(aa)(3) shall—

“(1) in the case of the first violation by the person, be fined under this title, imprisoned not more than 1 year, or both; or

“(2) in the case of any subsequent violation by the person, be fined under this title, imprisoned not more than 5 years, or both.”.

Section 922(p) of title 18, United States Code, is amended—

(1) in paragraph (1)—

(A) in the matter preceding subparagraph (A), by striking “any firearm”;

(B) by amending subparagraph (A) to read as follows:

“(A) an undetectable firearm; or”; and

(C) in subparagraph (B), by striking “any major component of which, when subjected to inspection by the types of x-ray machines commonly used at airports, does not generate” and inserting the following: “a major component of a firearm which, if subjected to inspection by the types of detection devices commonly used at airports for security screening, would not generate”;

(2) in paragraph (2)—

(A) by amending subparagraph (A) to read as follows:

“(A) the term ‘undetectable firearm’ means a firearm, as defined in section 921(a)(3)(A), of which no major component is wholly made of detectable material;”;

(B) by striking subparagraph (B) and inserting the following:

“(B) the term ‘major component’, with respect to a firearm—

“(i) means the slide or cylinder or the frame or receiver of the firearm; and

“(ii) in the case of a rifle or shotgun, includes the barrel of the firearm; and”; and

(C) by striking subparagraph (C) and all that follows through the end of the undesignated matter following subparagraph (C) and inserting the following:

“(C) the term ‘detectable material’ means any material that creates a magnetic field equivalent to or more than 3.7 ounces of 17–4 pH stainless steel.”;

(3) in paragraph (3)—

(A) in the first sentence, by inserting “, including a prototype,” after “of a firearm”; and

(B) by striking the second sentence; and

(4) in paragraph (5), by striking “shall not apply to any firearm which” and all that follows and inserting the following: “shall not apply to—

“(A) any firearm received by, in the possession of, or under the control of the United States; or

“(B) the manufacture, importation, possession, transfer, receipt, shipment, or delivery of a firearm by a licensed manufacturer or licensed importer pursuant to a contract with the United States.”.

(a) Secure gun storage or safety device.—Section 922(z) of title 18, United States Code, is amended by adding at the end the following:

“(4) SECURE GUN STORAGE BY OWNERS.—

“(A) OFFENSE.—

“(i) IN GENERAL.—Except as provided in clause (ii), it shall be unlawful for a person to store or keep any firearm that has moved in, or that has otherwise affected, interstate or foreign commerce on the premises of a residence under the control of the person if the person knows, or reasonably should know, that—

“(I) a minor is likely to gain access to the firearm without the permission of the parent or guardian of the minor; or

“(II) a resident of the residence is ineligible to possess a firearm under Federal, State, or local law.

“(ii) EXCEPTION.—Clause (i) shall not apply to a person if—

“(I) the person—

“(aa) keeps the firearm—

“(AA) secure using a secure gun storage or safety device; or

“(BB) in a location which a reasonable person would believe to be secure; or

“(bb) carries the firearm on his or her person or within such close proximity thereto that the person can retrieve and use the firearm as readily as if the person carried the firearm on his or her person; or

“(II) another individual unlawfully enters the premises under the control of the person and thereby gains access to the firearm.

“(B) PENALTY.—

“(i) IN GENERAL.—Except as otherwise provided in this subparagraph, any person who violates subparagraph (A) shall be fined $500 per violation.

“(ii) FORFEITURE OF IMPROPERLY STORED FIREARM.—Any firearm stored in violation of subparagraph (A) shall be subject to seizure and forfeiture in accordance with the procedures described in section 924(d).

“(C) MINOR DEFINED.—In this paragraph, the term ‘minor’ means an individual who has not attained 18 years of age.”.

(b) Firearm Safe Storage Program.—Title I of the Omnibus Crime Control and Safe Streets Act of 1968 (34 U.S.C. 10101 et seq.) is amended by adding at the end the following:

Paragraph (4)(B) of section 922(z) of title 18, United States Code, as added by this Act, is amended by adding at the end the following:

“(iii) ENHANCED PENALTY.—If a person violates subparagraph (A) and a minor or a resident who is ineligible to possess a firearm under Federal, State, or local law obtains the firearm and causes injury or death to such minor, resident, or any other individual, the person shall be fined under this title, imprisoned for not more than 5 years, or both.”.

(a) Best practices for safe firearm storage.—

(1) ESTABLISHMENT.—

(A) IN GENERAL.—

(i) Not later than 180 days after the enactment of this Act, the Attorney General shall establish voluntary best practices relating to safe firearm storage solely for the purpose of public education.

(ii) The Attorney General shall give not less than ninety days public notice, and shall afford interested parties opportunity for hearing, before establishing such best practices.

(B) REQUIREMENTS.—In establishing the best practices required under subparagraph (A), the Attorney General shall outline such best practices for preventing firearm loss, theft, and other unauthorized access for the following locations:

(i) Businesses.

(ii) Vehicles.

(iii) Private homes.

(iv) Off-site storage facilities.

(v) Any other such place the Attorney General deems appropriate to provide such guidance.

(C) PUBLICATION.—Not later than 1 year after the enactment of this Act, the Attorney General shall publish, in print and on a public website, the best practices created pursuant to subparagraph (A) and shall review such best practices and update them not less than annually.

(b) Promotion of safe firearm storage.—

(1) IN GENERAL.—Section 923 of title 18, United States Code, is amended by adding at the end the following:

“(m) Beginning on January 1, 2025, licensed manufacturers and licensed importers that serialize not less than 250 firearms annually pursuant to subsection (i) shall provide a clear and conspicuous written notice with each manufactured or imported handgun, rifle, or shotgun that—

“(1) is attached or adhered to, or appears on or within any packaging of, each handgun, rifle, or shotgun; and

“(2) states ‘SAFE STORAGE SAVES LIVES’ followed by the address of the public website established by the Attorney General pursuant to section 403(a) of the Protecting Our Kids Act.”.

(c) Safe storage devices for all firearm sales.—

(1) IN GENERAL.—Section 922(z) of title 18, United States Code, is amended by striking “handgun” each place it appears and inserting “handgun, rifle, or shotgun”.

(2) EFFECTIVE DATE.—This section and the amendments made by this section shall take effect on the date that is 180 days after the enactment of this Act.

(d) Kimberly Vaughan safe firearm storage grant program.—Part PP of title I of the Omnibus Crime Control and Safe Streets Act of 1968 (34 U.S.C. 10101 et seq.), as added by this Act, is amended by adding at the end the following:

(a) In general.—Section 5845 of the Internal Revenue Code of 1986 is amended—

(1) in subsection (a), by striking “and (8) a destructive device.” and inserting “(8) a destructive device; and (9) a bump stock.”; and

(2) by adding at the end the following new subsections:

“(n) Bump stock.—The term ‘bump stock’ means any of the following:

“(1) Any manual, power-driven, or electronic device that is designed such that when the device is attached to a semiautomatic weapon, the device eliminates the need for the operator of a semiautomatic weapon to make a separate movement for each individual function of the trigger and—

“(A) materially increases the rate of fire of the semiautomatic weapon, or

“(B) approximates the action or rate of fire of a machinegun.

“(2) Any part or combination of parts that is designed and functions to eliminate the need for the operator of a semiautomatic weapon to make a separate movement for each individual function of the trigger and—

“(A) materially increases the rate of fire of a semiautomatic weapon, or

“(B) approximates the action or rate of fire of a machinegun.

“(3) Any semiautomatic weapon that has been modified in any way that eliminates the need for the operator of the semiautomatic weapon to make a separate movement for each individual function of the trigger and—

“(A) materially increases the rate of fire of the semiautomatic weapon, or

“(B) approximates the action or rate of fire of a machinegun.

“(o) Semiautomatic weapon.—The term ‘semiautomatic weapon’ means any repeating weapon that—

“(1) utilizes a portion of the energy of a firing cartridge or shell to extract the fired cartridge case or shell casing and chamber the next round, and

“(2) requires a separate function of the trigger to fire each cartridge or shell.”.

(b) Amendments to title 18, United States Code.—

(1) Section 921(a) of title 18, United States Code, as amended by this Act, is further amended—

(A) in paragraph (3), by striking “muffler or firearm silencer” and inserting “muffler, firearm silencer, or bump stock”; and

(B) by adding at the end the following:

“(41) The term ‘bump stock’ has the meaning given such term in section 5845(n) of the National Firearms Act (26 U.S.C. 5845(n)).”.

(2) Section 922 of title 18, United States Code, is amended—

(A) in each of subsections (a)(4) and (b)(4), by inserting “bump stock,” before “machinegun”; and

(B) in subsection (o)(1) , by inserting “or bump stock” before the period.

Section 921(a) of title 18, United States Code, as amended by this Act, is further amended by adding at the end the following:

“(42) The term ‘large capacity ammunition feeding device’—

“(A) means a magazine, belt, drum, feed strip, helical feeding device, or similar device, including any such device joined or coupled with another in any manner, that has an overall capacity of, or that can be readily restored, changed, or converted to accept, more than 15 rounds of ammunition; and

“(B) does not include an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition.

“(43) The term ‘qualified law enforcement officer’ has the meaning given the term in section 926B.”.

(a) In general.—Section 922 of title 18, United States Code, is amended by inserting after subsection (u) the following:

“(v) (1) It shall be unlawful for a person to import, sell, manufacture, transfer, or possess, in or affecting interstate or foreign commerce, a large capacity ammunition feeding device.

“(2) Paragraph (1) shall not apply to the possession of any large capacity ammunition feeding device otherwise lawfully possessed on or before the date of enactment of this subsection.

“(3) Paragraph (1) shall not apply to—

“(A) the importation for, manufacture for, sale to, transfer to, or possession by the United States or a department or agency of the United States or a State or a department, agency, or political subdivision of a State, or a sale or transfer to or possession by a qualified law enforcement officer employed by the United States or a department or agency of the United States or a State or a department, agency, or political subdivision of a State for purposes of law enforcement (whether on or off-duty), or a sale or transfer to or possession by a campus law enforcement officer for purposes of law enforcement (whether on or off-duty);

“(B) the importation for, or sale or transfer to a licensee under title I of the Atomic Energy Act of 1954 (42 U.S.C. 2011 et seq.) for purposes of establishing and maintaining an on-site physical protection system and security organization required by Federal law, or possession by an employee or contractor of such licensee on-site for such purposes or off-site for purposes of licensee-authorized training or transportation of nuclear materials;

“(C) the possession, by an individual who is retired in good standing from service with a law enforcement agency and is not otherwise prohibited from receiving ammunition, of a large capacity ammunition feeding device—

“(i) sold or transferred to the individual by the agency upon such retirement; or

“(ii) that the individual purchased, or otherwise obtained, for official use before such retirement; or

“(D) the importation, sale, manufacture, transfer, or possession of any large capacity ammunition feeding device by a licensed manufacturer or licensed importer for the purposes of testing or experimentation authorized by the Attorney General.

“(4) For purposes of paragraph (3)(A), the term ‘campus law enforcement officer’ means an individual who is—

“(A) employed by a private institution of higher education that is eligible for funding under title IV of the Higher Education Act of 1965 (20 U.S.C. 1070 et seq.);

“(B) responsible for the prevention or investigation of crime involving injury to persons or property, including apprehension or detention of persons for such crimes;

“(C) authorized by Federal, State, or local law to carry a firearm, execute search warrants, and make arrests; and

“(D) recognized, commissioned, or certified by a government entity as a law enforcement officer.”.

(b) Identification markings for large capacity ammunition feeding devices.—Section 923(i) of title 18, United States Code, as amended by this Act, is further amended by inserting after subparagraph (A) of paragraph (1) the following:

“(B) A large capacity ammunition feeding device manufactured after the date of enactment of this subparagraph shall be identified by a serial number and the date on which the device was manufactured or made, legibly and conspicuously engraved or cast on the device, and such other identification as the Attorney General shall by regulations prescribe.”.

(c) Seizure and forfeiture of large capacity ammunition feeding devices.—Section 924(d) of title 18, United States Code, as amended by this Act, is further amended—

(1) in paragraph (1)—

(A) in the first sentence—

(i) by striking “Any firearm or ammunition involved in” and inserting “Any firearm or ammunition or large capacity ammunition feeding device involved in”;

(ii) by inserting “(v),” after “(k),”; and

(iii) by striking “any firearm or ammunition intended” and inserting “any firearm or ammunition or large capacity ammunition feeding device intended”; and

(B) by inserting “or large capacity ammunition feeding device” after “firearms or ammunition” each place the term appears;

(2) in paragraph (2)—

(A) in subparagraph (A), by inserting “or large capacity ammunition feeding device” after “firearms or ammunition”; and

(B) in subparagraph (C), by inserting “or large capacity ammunition feeding devices” after “firearms or quantities of ammunition”; and

(3) in paragraph (3)(E), by inserting “922(v),” after “922(n),”.

Section 924(a)(1)(B) of title 18, United States Code, as amended by this Act, is further amended by inserting “(v),” after “(q),”.

Section 501(a)(1) of title I of the Omnibus Crime Control and Safe Streets Act of 1968 (34 U.S.C. 10152(a)(1)) is amended by adding at the end the following:

“(I) Compensation for surrendered large capacity ammunition feeding devices, as that term is defined in section 921 of title 18, United States Code, under buy-back programs for large capacity ammunition feeding devices.”.

SEC. 701. NICS Report.