This Act may be cited as the “Made in America Act of 2021”.

(a) Definitions.—In this section:

(1) PRODUCED IN THE UNITED STATES.—The term “produced in the United States” means—

(A) in the case of iron or steel products, that all manufacturing processes for the iron or steel product, from the initial melting stage through the application of coatings, occurred in the United States;

(B) in the case of manufactured products, that—

(i) the manufactured product was manufactured in the United States; and

(ii) the cost of the components of the manufactured product that are mined, produced, or manufactured in the United States is greater than 50 percent of the total cost of all components of the manufactured product; and

(C) in the case of construction materials described in subparagraphs (D) through (I) of subsection (c)(1), that all manufacturing processes for the construction material occurred in the United States.

(2) SECRETARY.—The term “Secretary” means the Secretary of Commerce.

(b) Uniform standards.—

(1) IN GENERAL.—Not later than 180 days after the date of enactment of this Act, the Secretary shall issue uniform standards that define the term “all manufacturing processes” for the purposes of this Act—

(A) in the case of iron and steel, in a manner consistent with section 635.410(b)(1)(ii) of title 23, Code of Federal Regulations (as in effect on the date of enactment of this Act); and

(B) in the case of construction materials described in subparagraphs (D) through (I) of subsection (c)(1), in accordance with paragraph (2).

(2) CONSIDERATIONS.—In issuing uniform standards under paragraph (1)(B), the Secretary shall—

(A) ensure that the uniform standards require that each manufacturing process required for the manufacture of the construction material and the inputs of the construction material occurs in the United States, without regard to the origin of raw material inputs; and

(B) take into consideration and seek to maximize the direct and indirect jobs benefited or created in the production of the construction material.

(3) APPLICATION.—In carrying out a program described in subsection (d), the head of each Federal department or agency that administers a program described in subsection (d) shall—

(A) implement this Act; and

(B) adopt the uniform standards issued by the Secretary under paragraph (1) for purposes of implementing this Act.

(c) Requirement.—

(1) IN GENERAL.—Notwithstanding any other provision of law, none of the funds made available to carry out a program described in subsection (d) may be used for a project under that program unless all of the following materials used in the project are produced in the United States:

(A) Steel.

(B) Iron.

(C) Manufactured products.

(D) Non-ferrous metals.

(E) Plastic and polymer-based products (including polyvinylchloride, composite building materials, and polymers used in fiber optic cables).

(F) Concrete and other aggregates.

(G) Glass (including optic glass).

(H) Lumber.

(I) Drywall.

(2) EXCEPTION.—Paragraph (1) shall not apply in any case in which the head of the Federal department or agency with authority to carry out the applicable program determines that—

(A) applying paragraph (1) would be inconsistent with the public interest;

(B) the relevant material is not produced in the United States in sufficient and reasonably available quantities and of a satisfactory quality; or

(C) inclusion of the relevant material produced in the United States will increase the cost of the overall project by more than 25 percent.

(3) WAIVER.—If the head of the Federal department or agency with authority to carry out the applicable program makes a finding under paragraph (2) to waive paragraph (1), the head of the Federal department or agency shall, before the date on which the waiver takes effect—

(A) publish in the Federal Register a detailed written justification that provides the reasons that the waiver is needed; and

(B) provide an opportunity for public comment on the proposed waiver for a period of not more than 60 days.

(4) APPLICATION.—This subsection shall be applied in a manner consistent with United States obligations under international agreements.

(d) Programs described.—The programs referred to in subsection (c)(1) are each of the following:

(1) Direct and guaranteed loans and grants under section 306(a) of the Consolidated Farm and Rural Development Act (7 U.S.C. 1926(a)).

(2) Distance learning and telemedicine grants under section 2333 of the Food, Agriculture, Conservation, and Trade Act of 1990 (7 U.S.C. 950aaa–2).

(3) Broadband loans and loan guarantees under title IV of the Rural Electrification Act of 1936 (7 U.S.C. 950bb et seq.).

(4) The community connect grant program established under title III of the Agriculture, Rural Development, Food and Drug Administration, and Related Agencies Appropriations, 2004 (Public Law 108–199; 118 Stat. 29).

(5) Solid waste management grants under section 310B(b) of the Consolidated Farm and Rural Development Act (7 U.S.C. 1932(b)).

(6) A program or project carried out under the Public Works and Economic Development Act of 1965 (42 U.S.C. 3121 et seq.).

(7) Financial assistance for development, implementation, or modification of a State energy conservation plan under section 363 of the Energy Policy and Conservation Act (42 U.S.C. 6323).

(8) Grants for construction of health centers provided by the Secretary of Health and Human Services.

(9) Grants for construction, renovation, or repair of non-Federal research facilities provided by the Director of the National Institutes of Health.

(10) The public transportation security assistance grant program under section 1406 of the Implementing Recommendations of the 9/11 Commission Act of 2007 (6 U.S.C. 1135).

(11) Assistance provided under the Public Housing Capital Fund established under section 9(d) of the United States Housing Act of 1937 (42 U.S.C. 1437g(d)).

(12) The community development block grant program under title I of the Housing and Community Development Act of 1974 (42 U.S.C. 5301 et seq.).

(13) The Indian housing block grant program under section 101 of the Native American Housing Assistance and Self-Determination Act of 1996 (25 U.S.C. 4111).

(14) The rural water supply program under section 103 of the Rural Water Supply Act of 2006 (43 U.S.C. 2402).

(15) The National Parks and Public Land Legacy Restoration Fund established under chapter 2004 of title 54, United States Code.

(16) The Western Area Power Administration borrowing authority under title III of the Hoover Power Plant Act of 1984 (42 U.S.C. 16421a).

(a) In general.—Section 313(a) of title 23, United States Code, is amended by striking “and manufactured products” and inserting “manufactured products, and construction materials described in subparagraphs (D) through (I) of section 2(c)(1) of the Made in America Act of 2021”.

(b) No effect on iron or steel.—Nothing in this section or an amendment made by this section affects section 313 of title 23, United States Code, or the implementation of that section by the Secretary of Transportation with respect to iron or steel under chapter 1 of title 23, United States Code.

(c) Buy America.—Section 313(g) of title 23, United States Code, is amended—

(1) by striking “assistance under this chapter” and inserting “assistance under this title”; and

(2) by inserting “section 330 or” after “decision under” .

(d) Repeal of national waiver.—The Secretary of Transportation shall rescind any finding made under section 313(b)(1) of title 23, United States Code, for any manufactured product other than steel and iron manufactured products promulgated in the final rule titled “Buy America Nationwide Waiver Notification for Commercially Available Off-the-Shelf (COTS) Products With Steel or Iron Components and for Steel Tie Wire Permanently Incorporated in Precast Concrete Products”, and issued November 25, 1983 (48 Fed. Reg. 53099).

Section 602(c)(1) of title 23, United States Code, is amended by inserting “and section 22905(a)” after “section 5333(a)”.

Section 502 of the Railroad Revitalization and Regulatory Reform Act of 1976 (45 U.S.C. 822(h)(3)) is amended by adding at the end the following:

Section 5323(j) of title 49, United States Code, is amended—

Section 22905(a) of title 49, United States Code, is amended—

(a) In general.—Section 50101 of title 49, United States Code, is amended—

(1) in subsection (a)—

(A) by striking “steel and manufactured goods” and inserting “steel, iron, manufactured products, and construction materials described in subparagraphs (D) through (I) of section 2(c)(1) of the Made in America Act of 2021”; and

(B) by striking “(except section 47127)”; and

(2) in subsection (b)—

(A) in paragraph (2) by striking “steel and goods” and inserting “steel, iron, manufactured products, and construction materials”; and

(B) by striking “(except section 47127)”.

(b) Conforming amendments.—

(1) RESTRICTING CONTRACT AWARDS BECAUSE OF DISCRIMINATION AGAINST UNITED STATES GOODS OR SERVICES.—Section 50102 of title 49, United States Code, is amended by striking “(except section 47127)”.

(2) RESTRICTION ON AIRPORT PROJECTS USING PRODUCTS OR SERVICES OF FOREIGN COUNTRIES DENYING FAIR MARKET OPPORTUNITIES.—Section 50104(b) of title 49, United States Code, is amended by striking “(except section 47127)”.

(3) FRAUDULENT USE OF Made in America LABEL.—Section 50105 of title 49, United States Code, is amended by striking “(except section 47127)”.

(a) In general.—With respect to all Corps of Engineers construction and rehabilitation contracts to be awarded after the date of enactment of this Act and any construction and rehabilitation contract carried out by a non-Federal sponsor under section 204 of the Water Resources Development Act of 1986 (33 U.S.C. 2232) or section 1043 of the Water Resources Reform and Development Act of 2014 (33 U.S.C. 2201 note), the steel, iron, manufactured products, and construction materials described in subparagraphs (D) through (I) of section 2(c)(1) of the Made in America Act of 2021 furnished and delivered under such contracts shall be manufactured or fabricated in whole or substantial part in the United States.

(b) Conforming amendment.—

(1) WRDA 1996.—Section 235 of the Water Resources Development Act of 1996 (Public Law 104–303; 33 U.S.C. 2201 note) is repealed.

(2) WRDA 1999.—Section 222 of the Water Resources Development Act of 1999 (Public Law 106–53; 33 U.S.C. 2201 note) is repealed.

(a) Watershed pilot projects.—Section 122 of the Federal Water Pollution Act (33 U.S.C. 1274) is amended by striking subsection (c) and inserting the following:

“(c) Requirements.—The requirements of section 608 shall apply to any construction, alteration, maintenance, or repair of treatment works receiving a grant under this section.”.

(b) Pilot program for alternative water source projects.—Section 220 of the Federal Water Pollution Control Act (33 U.S.C. 1300) is amended by inserting before subsection (i) the following:

“(h) Requirements.—The requirements of section 608 shall apply to any construction of an alternative water source project carried out using assistance made available under this section.”.

(c) Sewer overflow and stormwater reuse municipal grants.—Section 221(e) of the Federal Water Pollution Control Act (13 U.S.C. 1301(e)) is amended by striking “section 513” and inserting “section 513, or the requirements of section 608,”.

(d) Grants for construction of treatment works.—Section 215 of the Federal Water Pollution Control Act (33 U.S.C. 1295) is amended—

(1) by striking “Notwithstanding any other” and inserting the following:

“(a) In general.—Except as provided under subsection (b) and notwithstanding any other”; and

(2) by adding at the end the following:

“(b) Requirements for certain projects.—Projects carried out under section 122, 220, and 221 shall be subject to the material requirements under section 608.”.

Section 608 of the Federal Water Pollution Control Act (33 U.S.C. 1388) is amended—

Section 5035 of the Water Resources Reform and Development Act of 2014 (33 U.S.C. 3914) is amended—

Section 1452(a)(4) of the Safe Drinking Water Act (42 U.S.C. 300j–12(a)) is amended—